Julius Chen's Recent Activity

  1. Julius Chen attached a file to the thread saltwater mixing station build.....

    So I built this fitting to connect between the 3/4" pipe and 1/4" the peristaltic pump. The slip between clear tubing and the white...

    Drain Fitting.jpg Sep 20, 2018 at 10:27 AM
  2. Julius Chen replied to the thread saltwater mixing station build.....

    Two lines: drain line from tank (not surpring), and new salt water line from brute can to tank (surprising). The build up is most...

    Sep 20, 2018 at 10:19 AM
  3. Julius Chen replied to the thread saltwater mixing station build.....

    I have found yelliw sediment inside 1/4” tubing in both nsw and drain lines. Overtime they got blocked real bad. I thus use 3/4” pvc...

    Sep 20, 2018 at 8:04 AM
  4. Julius Chen replied to the thread Julius' CDA 150 Build.

    I did connect WNCE3001 and my laptop via ethernet cable and disabled wifi on my laptop, so that I could confirm WNCE3001 is connected to...

    Sep 17, 2018 at 5:12 PM
  5. Julius Chen replied to the thread Julius' CDA 150 Build.

    Well, finally, I tried to unplug the ethernet wire, just let AI Director to operate in wireless mode. It finally allows me to add the...

    Sep 16, 2018 at 10:07 PM
  6. Julius Chen replied to the thread Julius' CDA 150 Build.

    The old AI Director got to be one of the worst controller to set up. After numerous attempts, I finally make some progress and now am...

    Sep 16, 2018 at 9:51 PM