Search results

The old AI Director got to be one of the worst controller to set up. After numerous attempts, I finally make some progress and now am stuck at the following error message. This is when I tried to add a new device (i.e. this AI Director I own) in my account at https://my.aquaillumination.com...

NASA called, they want their Martian sample back.

I built 4 of these, using $5 worth of parts from Tap Plastics

Found the corner flange from Chromis’ build a screen thread. Will give it a try. https://www.swisco.com/Overlap-Screen-Frame-Corner/pd/Corner-Keys-for-5_16-inch-Thick-Screen-Frame/95-221

How to build up the flange at corners of the screen top?

Gave it some thought, understand what Flagg37 meant now.... clips shaped like letter “h” lying on its back, right? Like this one in photo but larger for my 1/2” glass. Have not found a source yet.

Those clips onto the top of the side panels, right? My eurobraced tank is flat there, so the clips have no where to grab.

Some equipment in and 2” plus sand in! I realized I should have considered position the top eurobraced glass panes 1/2” lower so a DIY screen top can sit flush with side glass panels. Any suggestion how to make the top screen look clean?

@xcaret, Do you use pvc cement to fuse the edges, or need to caulk to seal? First time to hear about pvc sheets.

Is the pan under the stand custom made, or DIY? The corners look really well made.

How does QT help to identify a velvet carrier?

Put my old starboard in today. Do I only hand tighten those unions? Plan to wash and put sand in tank next week!

@sfsuphysics See Matt in attached photo!

Guys, Just installed plumbing. I use beanimal ghost overflow box. In photo are the siphon and open trickle pipes. I was told the smaller 1” pipe with gate valve should be trickle drain, and the latger one (to the right, which has a ball valve, refer to that blue handle pointing downward)...

I am to start up a new tank. Plan to pump a good poetion of salt water in my other running setup to the new tank. I think this means I can skip cycling of new tank. Any issues with this approach? I plan to move livevrocks from the running setup to the new tank a week into it.

Does my CDA euro braced tank need screen cover to prevent jumpers? I noticed the other day coral4me’s nice rimless tank, not euro braced, has no screen cover.

I could use the chiller, but if somebody else absolutely needs it too I will back off. I used fans during the summer hot days which seem to be OK.

sorry my bad. What I have are 2x Vega color, not Hydra color. Previous post updated.

So I have only 2x Vega color lights. Thinking to buy and add 2x used hydra 52 HD, or 2x Radion (XR30?). Thoughts? Radion could be too expensive. Also will look for used PM1 or PM2 to connect equipment in garage and tank in sitting room, if on sales for a good price.

It was Ashalye taking photo. I was the guy in blue shorts and gray T-shirt with back facing the cam. Honestly, I had about only 10 pounds in my hands ;-) Today's move went flawlessly. Quite a few great decisions/suggestions by lbn and Coral4me. Experience absolutely made a difference here...