Scott Sweet
Supporting Member
All,
I had to do away with the plunger. Didn't last...so I had to wire it and connect to a relay.
I use the Accessory port on the 832 to power a 24V relay that closes this circuit to put it the L1 in to Feed Mode. Worked great once I got the pump calibrated.
I had to do away with the plunger. Didn't last...so I had to wire it and connect to a relay.
I use the Accessory port on the 832 to power a 24V relay that closes this circuit to put it the L1 in to Feed Mode. Worked great once I got the pump calibrated.