welcome back y’all and thanks Denzil for getting the forum up and running.
So my question is this-
I incidentally both cleaned out the skimmer Sunday after a year of operation and...split the hose running from the intake pipe to a t barb connected to a media container with CO2 absorbent media. However since then -no skim, slime on the walls, no foam-nada.
Not sure if needs a few extra days running or something else I should be looking at.
Thanks
LB
So my question is this-
I incidentally both cleaned out the skimmer Sunday after a year of operation and...split the hose running from the intake pipe to a t barb connected to a media container with CO2 absorbent media. However since then -no skim, slime on the walls, no foam-nada.
Not sure if needs a few extra days running or something else I should be looking at.
Thanks
LB