I have these couple fixtures that do not work properly; at first I was thinking make a functional one from two partially working fixtures. The power supplies, drivers? all work; tested the working block of LED's on each of the power supplies and all six drivers work. Got a watch battery and rigged it with a wire to test each LED on one fixture; three do not work on the blocks that don't power any of the LED's; my question is, if I replace those faulty LED's, Is the problem supposed to be fixed? I thought if one LED was out, the rest should have no issue turning on unless they are set like an old Christmas light; one tiny bulb goes out then the entire light set is at fault.
The burnt looking LED's are UV but they do work.
Thanks
The burnt looking LED's are UV but they do work.
Thanks