got ethical husbandry?

Jeff's 120

A quick Full tank shot... still haven't put corals in. I will probably start coral scaping next weekend.

3315844494_f3c93752fc_b.jpg


....and thanks for sending me the BAR stickers Jeremy.... It looks good on my frag tank. 8)

3315841708_c9e847517a_b.jpg
 
The change over to the new site has jacked up all the pics in my tank journal... will try and fix them as I can.... really when I have absolutely nothing else to do. ;)
 
zambavi said:
The change over to the new site has jacked up all the pics in my tank journal... will try and fix them as I can.... really when I have absolutely nothing else to do. ;)

I have the same problem, and the real issue is I can't figure out how to size them so they fit in the new softwares borders
 
ya... don't think you do anything with the link... at least mine are based on the sizing option I chose when I origionally posted them. The only way to change them would be to go back and bring over a new linc for each pic with the new size selection.... not doing that...
 
Here is my tank as it sits today. You can see why I am wanting to upgrade the tank itself; visible overflow and glass color.

2878776850_0e60cd0d2a_b.jpg


For the first month I have been running a new ASM G-3 rated for 250 gallons and a Coralife Superskimmer rated for 125 at the same time. The ASM G-3 is skimming very nicely now and the Coralife Superskimmer I removed last night since it was no longer needed.

2884660816_9c6824fd46_b.jpg


For lighting I am running 2 x 250w 14K Metal Halides and 2 x 110w Actinic T12VHO's. I am also using 4 Icecap LED's that give the tank a very strong blue during the evenings.

2886953712_37f2a8f430_b.jpg


The new ASM G-3 Skimmer...

2884658806_517f06ca3f_b.jpg


The Stand is made of 2" L-Bar Steel and the Skirt and Canopy I made myself out of Red Oak Stained Ebony with 4 layers of Poly over it for a nice protected finish. Before setting it back up I spent two days refinishing both the skirt and canopy to look like new again and added hardware for aesthetics.

2878049024_07a2439a70_b.jpg

2874879744_b18bf8fee3_b.jpg

2874044725_37030ed80a_b.jpg

2877943265_b9dd96e26f_b.jpg


It's just the beginning...
 
So I got the new tank in today... As an update it is a 120 Gallon Tall TruVu Tank 48"x18"x30". Yes, it is taller than it is wide, which many frown upon, but for the footprint that my wife will allow it is the largest gallon tank I can get! ;) Also... I will have the 55 Gallon Sump Fuge working with this that increases my surface area nicely. This will give me a total system volume of about 160-165 Gallons with a surface area of 1440 sq. in. or equivalant to a tank that is 48L"x30W"x26"Deep... at least that's the way I like to think of it. 8)

So I got the tank home and everything looked great until I looked at the two holes drilled in the overflow area. I will be doing a 3/4" return and a 1" drain, both with schedule 80 bulkheads. Unfortunately the 3/4" return requires a hole that is drilled at 1 5/8" but they made a mistake and drilled it at 1 3/8"; they were probably thinking 1/2" schedule 80. Also the drain which needs a 1 7/8" hole is drilled a little rough and will require some sanding to get the bulkhead through it without forcing it. Other than that, the tank is built very nicely. It is clean, nicely finished and very hardy in its look and feel. So I was going to start this project this weekend but it looks like It will be pushed out a little. I put a call in to see how they want to handle correcting the sizes on these holes.

I've got plenty to do in the mean time as I gather plumbing and building supplies to improve my plumbing and beef up my stand a little for the extra weight of 50 gallons. Until next time, here are a few pictures of the new tank.

3102080470_208c10c6b8_b.jpg

3101245133_c7b609c87e_b.jpg

3101245585_0ea51b5f3e_b.jpg

3101246433_538abf4e5a_b.jpg

3101247685_3a4051657f_b.jpg

3102083062_e3ce71691a_b.jpg

3101246845_0cf4b111e9_b.jpg
 
Thought I would go ahead and post the roadmap I am following for this project. The only hardware I still need to gather is the ATO and Chiller. I will be building the flanking cabinets over the holiday.
3114343574_9538224745_b.jpg
 
Ok... Tank drilling time. First my drill press is a bench top version so it will take some Modification before I can use it on my tank.

They actually drilled this 120g tank for a 1/2"return... both holes cut wrong...
3114361223_3cc4fa0247_b.jpg

3115191318_1aeca11a75_b.jpg

My Drill Press...
3114360739_c2be6abb74_b.jpg

Taking it apart...
3115195128_a32990dc04_b.jpg

3115193512_86e407c3ff_b.jpg

3115196356_0913934d61_b.jpg
 
My first time to drill an acrylic tank...
3114367277_7387a567cf_b.jpg

First hole was a snap... now for the second one...
3115197996_3f5df97613_b.jpg

3115198584_f2d3692874_b.jpg

3114370015_73ee108d4b_b.jpg


My Schedule 80's now fit! It was quick and easy.
3114370845_54809a8389_b.jpg
 
The holes are looking great. I spent some time putting together the 1/2" PVC stands this evening that will act as a framework for my live rock. I will be doing a mixture of drilling my rock to slide over the 1/2" PVC and smaller drilling of the rock to zip tie to the PVC. I haven't determined what the heigth of everything will be yet but will determine once I get into the aquascaping itself. I picked up a 1" masonry bit to drill my rock with.

3114459695_8e125198c0_b.jpg

3114459117_dc3a6dc98c_b.jpg

3114468547_752698f2a1_b.jpg
 
The new location for my RO/DI system. I have been carrying it back and forth from my gargage to the kitchen sink and running a garden hose into the house to feed it. Recently read a post here on BAR where someone did a Y off of there Washing machine line to hook up their RO/DI and ran the drain line down the washing machine drain line. I liked the idea a lot and picked up the parts today to do it. This is what it looks like now. My wife is certainly happier with it. added a shut off on the feed line of the RO/DI to make it all work.
3123195849_66c8bd22cc_b.jpg

3124023156_48ca342819_b.jpg
 
The 40 Gallon Breeder I came accross for $50 this week. 36"L x 18"W x 16"H. A pretty fair deal and a good frag tank I think. This will be my SPS frag tank that I will have looped into the sumpfuge that will be running my 120G Display. Should give me a total system volume of about 200G.

3133313549_9e1bf86a1e_b.jpg
 
Picked up this set of glass hole bits on ebay from a guy down in Florida to drill this frag tank with. $59.99 + Free shipping for the set of 5. Took only 3 days to get them.

Includes a
3"
2 3/8"
1 3/4"
1 1/2"
1 1/8"

Will be drilling the back of the tank for a 3/4" return and 1" drain; using the 1 3/4" and 1 1/2" bits.

3133313195_e3f871bb90_b.jpg
 
Well I thought I'd do an update... 8)

Tank has been doing very well... Over the last couple months my perameters have been steady and in range.

pH :arrow: stays between 8.06 and 8.27
Temp :arrow: stays between 77 and 78 degrees
Nitrates :arrow: are staying around 5ppm with weekly 10% (20 gallons) water changes and heavy feedings
Alk :arrow: continues to hover right around 10
Salinity :arrow: a consistent 1.026 or 53.0 via pinpoint reading due to ATO

Haven't been testing for mag and calc regularly :quest: but the few times I have done they've been pretty close to common reef aquarium targets.

The skimmer cup on the ASM G-3 fills up with a nice dark skimmate about once a week.

My 20 gallon L ATO tank has to be completely refilled about every 7-8 days

I've had a little hair algae in the frag tank only... |( as the new black eggcrate is leaking some phosphates I think.

All of my SPS corals are experiencing noticable growth. My LPS growth has slowed a bit for some reason though... :(

I'm loving my new lighting (ballast and bulbs) all of my SPS is putting on color I didn't realize it could reach... very impressed with it.

I added a Blotchy Anthias and three Dispar Anthias I picked up from Max at AS a few weeks back and everthing has adjusted without issue and are eating very well.

The six line in my frag tank did it's third head dive out of the tank a couple of weeks ago... :| except this time I wasn't there to put him back in.... Looked like a piece of fruit roll-up stuck to the floor when I found him the following morning. :Sp I have since put in a yellow coris wrasse and some eggcrate covers on the two ends of the frag rack to avoid the jumping issue in the future.

During the time between the sixline and the yellow coris I spotted a couple of tiny red flat worms... :O (thanks phong for your keen eye)... I think the yellow wrasse is now taking care of the little buggers the six line was previously keeping under control. I plan on hitting the tank with FWE this weekend to make sure I'm good going forward.

...and the primary reason there are so many emoticons in this post is because they are new and I just wanted to try them... S)
 
An update... tank is doing well. About 3 weeks ago I had some minor RTN'ing hit 4 different Colonies. Luckily it stoped on each about 1/4" up on the base. They are all doing fine now and starting to grow over the dead sections.

Picked this Spider Sponge up from Max's a few weeks back. It stayed completely closed up the first week or so and the color wasn't great at first.... but it has been looking awsome lately... especially over the last two weeks. Thought I'd post a pic of it...

3462078114_be92a6933b_b.jpg
 
I'll give an update here. It's been a couple months since i've been on BAR due to range of others issues going on in my life but things are leveling out and coming back to normal. As of today my tank is looking well but it did go through a pretty tough period about a month back that had me biting my nails and little time to do anything about it. I did loose more colonies than I care to think about but still ironically have a tank full of nice looking coral. My apoligies to my lack of response to messages i've received over the past couple months. Don't see that as a problem moving forward. I look forward to attending the August swap and hope to have some nice frags to bring in to contribute. I'll post some updated pics this weekend when i have a little more time to breath!
 
Back
Top