Reef nutrition

Innovative Marine Fusion 20 Long in Brentwood

Ah good to know! I was doing 2 part before so will make sure to test 3 days later and not make any adjustments until then. Thank you!
It's more so for daily dosing, not for any type of Corrective type dosing. As it has alk magnesium and calcium. you have no ability to adjust a single valve alone.

It's what I dose 90%+ of the time with dosing pumps. I also have esv bionic 2 part for specific adjustments to a single value maybe once a month. Once things are balanced out. Afr is what keeps them stable for the most part. Though levels do tend to drift out of balance in time hence the occasional adjustment dose.
 
It's more so for daily dosing, not for any type of Corrective type dosing. As it has alk magnesium and calcium. you have no ability to adjust a single valve alone.

It's what I dose 90%+ of the time. I also have esv bionic 2 part for specific adjustments to a single value maybe once a month. Once things are balanced out. Afr is what keeps them stable for the most part. Though levels do tend to drift out of balance in time hence the occasional adjustment dose.
Got it so you're saying I should use my 2 part to get to the levels I'd like then figure out my AFR dose to keep those levels? Then do an adjustment dose as needed?
 
Got it so you're saying I should use my 2 part to get to the levels I'd like then figure out my AFR dose to keep those levels? Then do an adjustment dose as needed?
I've been using afr for 2+ years now. That's my method. I probably test once maybe twice a month now.

To find out the daily dose you need to get things balanced (adjusted with maybe 2 part). To start with than, test a few days in a row to get trends of your element uptake as in what gets used every day. After a few days you will know example tank goes down 2 dkh a day so you will use afr to replace that 2 dkh per day to keep things stable.


Keeping in mind afr isn’t instant as mentioned in the post above. So takes daily testing for a period of time. To get it right before you can dial back on testing and ride it out.

Use the formula on bottle as a base line and adjust does up or down slightly until it holds steady for several days.

Takes a little bit to dial in dose right. But once dosing is dialed it your set for a while and it's super easy. I only adjust my dosing pumps like every few months by a few mils.

Though my tank is mostly sps acros I refer to, so here so being stable matters alot more and much easier for swings to happen as growning sps takes up lots of alk calc and mag. So testing for me these days is just ensuring I stay stable and adjust when needed.
 
I've been using afr for 2+ years now. That's my method. I probably test once maybe twice a month now.

To find out the daily dose you need to get things balanced (adjusted with maybe 2 part). To start with than, test a few days in a row to get trends of your element uptake as in what gets used every day. After a few days you will know example tank goes down 2 dkh a day so you will use afr to replace that 2 dkh per day to keep things stable.


Keeping in mind afr isn’t instant as mentioned in the post above. So takes daily testing for a period of time. To get it right before you can dial back on testing and ride it out.

Use the formula on bottle as a base line and adjust does up or down slightly until it holds steady for several days.

Takes a little bit to dial in dose right. But once dosing is dialed it your set for a while and it's super easy. I only adjust my dosing pumps like every few months by a few mils.

Though my tank is mostly sps acros I refer to, so here so being stable matters alot more and much easier for swings to happen as growning sps takes up lots of alk calc and mag. So testing for me these days is just ensuring I stay stable and adjust when needed.
Thank you so much! This is super helpful
 
Got a couple more things cleaned up and added some additional pieces of equipment.

Bought a used Ecotech battery backup for $30 and replaced the battery for another $30 and picked up a dosing pump to dose AFR. Going to start with 2.5ml daily and see how that goes, I have 2 part that I dose manually to get to the levels I want and then hopefully can dial in the AFR to keep things steady.

Also added a float valve in my ATO so I get notified when it gets low. The app has been a bit annoying so still trying to get the notifications dialed in.
 

Attachments

  • Screenshot 2026-02-05 at 5.51.43 PM.png
    Screenshot 2026-02-05 at 5.51.43 PM.png
    419.3 KB · Views: 5
  • Screenshot 2026-02-05 at 5.52.04 PM.png
    Screenshot 2026-02-05 at 5.52.04 PM.png
    826.7 KB · Views: 5
  • Screenshot 2026-02-05 at 5.51.57 PM.png
    Screenshot 2026-02-05 at 5.51.57 PM.png
    434.3 KB · Views: 4
  • Screenshot 2026-02-05 at 5.51.50 PM.png
    Screenshot 2026-02-05 at 5.51.50 PM.png
    483.7 KB · Views: 5
Got a couple more things cleaned up and added some additional pieces of equipment.

Bought a used Ecotech battery backup for $30 and replaced the battery for another $30 and picked up a dosing pump to dose AFR. Going to start with 2.5ml daily and see how that goes, I have 2 part that I dose manually to get to the levels I want and then hopefully can dial in the AFR to keep things steady.

Also added a float valve in my ATO so I get notified when it gets low. The app has been a bit annoying so still trying to get the notifications dialed in.
Which battery did you go with?
 
Back
Top