Fragging advice for this zoa.

[gmdcdvm]

Hello,
I have never fragged a zoa before. Usually I just drop a rock on them. The climb on, and that’s my frag plug. This is one solid rock. Just wondering what the advice would be.
These are Jedi mind trick zoa’s.

 

[MichaelB]

Hello,
I have never fragged a zoa before. Usually I just drop a rock on them. The climb on, and that’s my frag plug. This is one solid rock. Just wondering what the advice would be.
These are Jedi mind trick zoa’s.

Bɔne cutters snip off rock right under polyps, or best option is using a band saw.

Ones on bottom edge u could probably cut between polyps with razor.blade

 

[gmdcdvm]

Its carib sea dry rock. That stuff is hard to chip away or break. I suspect the saw might be my best option.

 

[MichaelB]

Its carib sea dry rock. That stuff is hard to chip away or break. I suspect the saw might be my best option.

A dremmel could also possibly work, it’s what i use most of the time. Saw for sure if your trying to frag up the entire thing. If u just want frags snip off ends of frag plugs place under the rocks and they will naturally spread to them. Than just cut them loose later.

 

[richiev]

Somewhat joking, but assuming they grow fast like normal zoas, the other option is put on gloves & goggles and crack the rock with a chisel and hammer. The rock should crack or shatter, and you then have a bunch of frags. Likely would damage some, but they're zoas and will grow back anyway.