Kessil

Mike's RS 425XL Build (July, 05/2019)

Great setup! I am curious why you opted to add kalk to your dosing setup when already doing alk and ca. Are you trying to get higher ph, or lessen the amount of 2 part you are using to precipitate less Na-Cl out?
 
H2OPlayar said:
Are you trying to get higher ph, or lessen the amount of 2 part you are using to precipitate less Na-Cl out?
Click to expand...

Both! my pH always languished - I was only ever able to eek out over 8.2 with the windows open and whole-house fan chugging, but not when house was sealed up when we're all home. With summer here (and potential bad air quality keeping us from opening the house up), I wanted a different way to raise pH and the benefit of reducing 2-part consumption helps!
 
After adding the kalk reactor (I run the same and love it), did you notice any change in your phosphate levels? I understand kalk can cause phosphate to precipitate out of solution but not sure if in a measurable amount?
 
Patio said:
After adding the kalk reactor (I run the same and love it), did you notice any change in your phosphate levels? I understand kalk can cause phosphate to precipitate out of solution but not sure if in a measurable amount?
Click to expand...
It supposed to….but Not that I‘ve noticed- but I do dose neophos to stay at .01
 
It's been forever and a day since updating. Tank has been very stable, though I gave up trying to keep NO3 over 10 - no matter how much I add (home made NANO3 and/or Neo-Nitrate), I get a temp bump, then down to 1-2PPM. Addition on Neo-Phos keeps me at .005-.01. I remodeled my cabinet slightly in hopes of clearing out enough space for a Carx, but even with deleting the Alk and Cal dosing jars, no dice. I think I'll have to get a matching side caddy when upgrading.

I have been experiencing good growth in the few months since adding Kalk, and I've added several new wish list pieces since. Next for upgrades, I think i'll switch from WAVs and Gyres to EchoTech MPs - maybe 4 MP40s - 2 for the back and 2 for the sides. I hate unraveling wires to clean the pump heads.

anyway, here is some of my new eye candy! :)





JAM_9401.jpg
JAM_9395.jpg
JAM_9370.jpg
JAM_8493.jpg



JAM_9392.jpg
JAM_9255.jpg
JAM_8483.jpg
JAM_9295.jpg
JAM_9238.jpg
JAM_9257.jpg
 
Beautiful pics ! What type of camera are you using? Tank looks amazing..I just got a 220g few weeks back which will take a bit to get up to speed before I can start putting my other tanks corals in..I moved it with existing fish Plus a few mushrooms rocks from a guy in Novato to my place in Corte Madera..Gota rehome a few coral munchers before the wife gets to attached to them lol....
 
PjFish said:
Beautiful pics ! What type of camera are you using? Tank looks amazing..I just got a 220g few weeks back which will take a bit to get up to speed before I can start putting my other tanks corals in..I moved it with existing fish Plus a few mushrooms rocks from a guy in Novato to my place in Corte Madera..Gota rehome a few coral munchers before the wife gets to attached to them lol....
Click to expand...
Great to meet a fellow Marin reefer! That 220 will be awesome!

I use my old Nikon D750 Body for these paired mostly with a Nikon 105MM macro lens. I sometimes use a prime 50mm, or a 24-70mm. But the macro lens is pretty great - I still need to learn how to use it better. Depending on light levels, I tripod it, too.
 
Mike Yasin said:
Great to meet a fellow Marin reefer! That 220 will be awesome!

I use my old Nikon D750 Body for these paired mostly with a Nikon 105MM macro lens. I sometimes use a prime 50mm, or a 24-70mm. But the macro lens is pretty great - I still need to learn how to use it better. Depending on light levels, I tripod it, too.
Click to expand...
What is the coral with the orange polyps. Second photo?
 
Mike Yasin said:
It's been forever and a day since updating. Tank has been very stable, though I gave up trying to keep NO3 over 10 - no matter how much I add (home made NANO3 and/or Neo-Nitrate), I get a temp bump, then down to 1-2PPM. Addition on Neo-Phos keeps me at .005-.01. I remodeled my cabinet slightly in hopes of clearing out enough space for a Carx, but even with deleting the Alk and Cal dosing jars, no dice. I think I'll have to get a matching side caddy when upgrading.

I have been experiencing good growth in the few months since adding Kalk, and I've added several new wish list pieces since. Next for upgrades, I think i'll switch from WAVs and Gyres to EchoTech MPs - maybe 4 MP40s - 2 for the back and 2 for the sides. I hate unraveling wires to clean the pump heads.

anyway, here is some of my new eye candy! :)





View attachment 32834View attachment 32835View attachment 32836View attachment 32844


View attachment 32838View attachment 32839View attachment 32840View attachment 32841View attachment 32842View attachment 32843
Click to expand...
Roster of these newbies:

TCK Kaleidoscope (impulse b/c this was dirt cheap being colored down)
WWC Allstar
RRC Rainbow Splice (green side)
TCK Wildcard
TCK Utter Fury
RRC Bleeding Avenger
Vivid Insanity
CB Maleficent (not totally new, but part of upload for some reason)
TCK Devastator
BC Laser Melon
 
Changed over to KZ elements about two months ago from Red Sea Coral Colors due to some inconsistent elements values from last two ICP readings. I did have to dial down the #3 bottle (Aminos) due to a little burn on a couple of coral, but I think I solved that. Other than my female clown knocking stuff around (killed 2 frags and damaged 3 coral on unglued rocks), steady as she goes for the most part.

Here's some recent porn
 

Attachments

  • JAM_3816.jpg
    JAM_3816.jpg
    85.8 KB · Views: 169
  • JAM_3822.jpg
    JAM_3822.jpg
    132.5 KB · Views: 174
  • JAM_3821.jpg
    JAM_3821.jpg
    63.2 KB · Views: 164
  • JAM_3820.jpg
    JAM_3820.jpg
    84.3 KB · Views: 148
  • JAM_3815.jpg
    JAM_3815.jpg
    130.2 KB · Views: 176
  • JAM_3868.jpg
    JAM_3868.jpg
    95 KB · Views: 157
  • JAM_3872.jpg
    JAM_3872.jpg
    58 KB · Views: 154
  • JAM_3861.jpg
    JAM_3861.jpg
    80.2 KB · Views: 150
  • JAM_3867.jpg
    JAM_3867.jpg
    74.5 KB · Views: 149
  • JAM_3859.jpg
    JAM_3859.jpg
    85 KB · Views: 159
Mike Yasin said:
Changed over to KZ elements about two months ago from Red Sea Coral Colors due to some inconsistent elements values from last two ICP readings. I did have to dial down the #3 bottle (Aminos) due to a little burn on a couple of coral, but I think I solved that. Other than my female clown knocking stuff around (killed 2 frags and damaged 3 coral on unglued rocks), steady as she goes for the most part.

Here's some recent porn
Click to expand...
 

Attachments

  • JAM_3857.jpg
    JAM_3857.jpg
    63.9 KB · Views: 158
  • JAM_3830.jpg
    JAM_3830.jpg
    74.3 KB · Views: 156
Mike Yasin said:
Changed over to KZ elements about two months ago from Red Sea Coral Colors due to some inconsistent elements values from last two ICP readings. I did have to dial down the #3 bottle (Aminos) due to a little burn on a couple of coral, but I think I solved that. Other than my female clown knocking stuff around (killed 2 frags and damaged 3 coral on unglued rocks), steady as she goes for the most part.

Here's some recent porn
Click to expand...
Amazing work Mike.
 
You must log in or register to reply here.
Back
Top