Neptune Aquatics

Serious plumbing question - how to connect a RO membrane drain hose under the sink

Alexander1312

Supporting Member
I’m currently using an Aquatic Life under-sink water filtration system for my drinking water. My source water measures 32 TDS, and after filtration, it’s still 29 TDS—so it’s time for an upgrade.

I’d like to switch to a standard reverse osmosis (RO) system. My current setup does not appear to have a drain hose, likely because there’s no RO membrane installed.

Has anyone installed a standard RO system in a setup like mine (see photo below)? I’d appreciate any advice or insight on how this would work in my situation.

IMG_7979.jpeg
IMG_7978.jpeg
IMG_7977.jpeg
 

One option, like Mike said

 
Whichever route just make sure to watch vids on the right location for installation. You do not want sewer gas back flow or food debris clogging and rotting.. This would be my first two spots for each product mentioned above note Im not an plumbing professional but have installed many kitchen and bathroom sinks along with all the plumbing..
Good luck
 

Attachments

  • IMG_3830.jpeg
    IMG_3830.jpeg
    103.3 KB · Views: 2
Back
Top