DBTC: Sunkist Bounce Mushroom

[georgec]

wasnt that before this dbtc?

Your sunkist was from this strain.


Sent from my iPhone using Tapatalk

@NelsonCh is that some sort of basket you keep some of your frags in? Just curious.

 

[RandyC]

@NelsonCh is that some sort of basket you keep some of your frags in? Just curious.

A lot of people that have growout tanks (especially BTAs) use these.

10 in. Square Aquatic Plant Basket

TOTALPOND 10 in. Square Aquatic Plant Basket 52252 - The Home Depot

Create a perfect choice for underwater planting in your backyard or water garden using this Total Pond 1Square Plant Basket.

www.homedepot.com

 

[georgec]

A lot of people that have growout tanks (especially BTAs) use these.

10 in. Square Aquatic Plant Basket

TOTALPOND 10 in. Square Aquatic Plant Basket 52252 - The Home Depot

Create a perfect choice for underwater planting in your backyard or water garden using this Total Pond 1Square Plant Basket.

www.homedepot.com

thanks. Assumed it was something like that. I've been meaning to buy or try to 3-D print some sort of mushroom basket.

 

[Srt4eric]

thanks. Assumed it was something like that. I've been meaning to buy or try to 3-D print some sort of mushroom basket.

I printed this one just scaled down a bit for my tank and it's working out great.

Reef Aquarium Shroom Anemone Breeder Box by sjsmith801

Don't print with PLA, it's not reef safe. PETG is preferred. ABS is reef safe but the corners will probably lift. Nylon is fine as well. Printed on Artillery Sidewinder X1, .32 layer height and 80mm\s speed. 3 top and bottom layers and 15% infil. It'll be underwater so no need for super fine...

www.thingiverse.com

 

[georgec]

I printed this one just scaled down a bit for my tank and it's working out great.

Reef Aquarium Shroom Anemone Breeder Box by sjsmith801

Don't print with PLA, it's not reef safe. PETG is preferred. ABS is reef safe but the corners will probably lift. Nylon is fine as well. Printed on Artillery Sidewinder X1, .32 layer height and 80mm\s speed. 3 top and bottom layers and 15% infil. It'll be underwater so no need for super fine...

www.thingiverse.com

Thanks. An excuse for me to purchase some PETG. Will need to really scale it down for my tank. I can probably fit something that's 2X2 in a corner of my tank.

 

[BARcode]

@Baykes gave a frag to @popper today.

1 polyp nickel sized

 

[BARcode]

@max_nano made a journal update.

Updating my picture now that this is in a new tank. Curious to see if the different spectrum increases or decreases the bubbles

 

[Baykes]

@max_nano made a journal update.

@max_nano your frag is looking sweet! Love the size of those bubbles

 

[BARcode]

@Baykes gave a frag to @Yuk SUm 1 day ago.

Nickel size frag

 

[BARcode]

@Baykes gave a frag to @LukeTheReefer today.

Baby pencil eraser size frag

 

[BARcode]

@Yuk SUm made a journal update.

 

[BARcode]

@Beanju made a journal update.

Not too bad. Color are not really popping yet

 

[BARcode]

@markovkaa would like a frag of this one.

@ryanraff, @svreef, @markovkaa, are in line for a frag.

 

[BARcode]

@LukeTheReefer made a journal update.

 

[BleepBloopMunchMunch]

Got mine today!

 

[BARcode]

@Baykes gave a frag to @Oliver today.

Nickel size frag. Many but smaller bubbles, should bubble up more with time

 

[Oliver]

I picked up my frag today , will post a picture as soon as I can, thank you.


Sent from my iPhone using Tapatalk

 

[BARcode]

@Srt4eric just made 1 frag(s) available. Get them while they're fresh!

@ryanraff, @svreef, @markovkaa, are in line for a frag.

 

[BARcode]

@Srt4eric gave a frag to @IOnceWasLegend today.

 

[BARcode]

@Baykes gave a frag to @BleepBloopMunchMunch 18 days ago.

Quarter size frag small bubbles