Search results

That's what happened to me haha! They're beautiful, so at least there's that.

I have a lot of closer interest, but if those fall through, i'll let you know. I might have to go down to San Jose to pickup some suction cups to move a tank :)

Hey Michael, I'm in Albany, CA.

I have a rock with 6 rainbow BTA's. They all split from a single one I got from Aquatic Collection about 8 years ago. Honestly, these look brighter than a typical rainbow, but I'm not going to try to upsell it as something fancier than that. They are beautiful. I have put them next to my CSB...

I wanted to report that I have successfully set up the RODI with these pieces: https://www.amazon.com/John-Guest-Speedfit-PSEI6012U9P-Compression/dp/B06XG3ZHGM?ref_=ast_sto_dp&th=1 https://www.amazon.com/JG-Speedfit-PP061208WP-8-Inch-Reducer/dp/B005S4OP04/ref=sr_1_8 That speedfit compression...

Yeah it looks like it's made for the conversion. I will just need this to reduce from 3/8 to 1/4 I'm thinking: https://www.amazon.com/JG-Speedfit-PP061208WP-8-Inch-Reducer/dp/B005S4OP04/ref=sr_1_8

These are the pieces: https://www.homedepot.com/p/BrassCraft-1-2-in-Compression-Inlet-x-3-8-in-Compression-Outlet-1-4-Turn-Angle-Valve-G2CR19X-C1/202047059 https://www.homedepot.com/p/Everbilt-3-8-in-x-1-4-in-OD-Compression-Brass-Reducing-Coupling-Fitting-801229/207176921 Will any of these work...

I have had the first generation one for awhile, controlled by an Apex. No issues other than the mixing pump failing and then when I got a new one, that failed too. The new tank setup is getting this installed in the sump's return chamber. I'll have a more reliable powerhead in that chamber, and...

Part of the home remodeling work was to get it ready for the fish tank. I have a water source that has a reducer that is two parts that goes down to the 1/4", but the fitting won't securely hold an RO tubing line under pressure. What do I need to get this to connect properly?

amazing, thank you!

Tractor supply only has the 300 gallon. While it would fit, it's not super ideal, and I only need/want a 200 gallon. But either way, I'm happy paying the $55 shipping from Home Depot, but before I pull the plug, just hoping to see if anyone used this specific tank and had experience with it...

I'm planning out a holding tank for NSW deliveries and have a 34" wide x 34" deep x 92" tall area to put a tank as big as possible. I found a bunch online but they're normally about $400 + $400 shipping, but on Home Depot they sell these Chem-Tainer versions with only a $55 delivery fee. This...

I have the PayPal receipt, but I got a note from Barcode that my membership expired. It was an automatic payment. BTW: I know it says contact someone on BOD, has a link but that link to the list doesn't give me permission to view. And I guess I can just look on forums until I find someone on...

alright, I ordered these. I'll see if it works with the contractors, otherwise it'll be easy to return. Thank you!

Yeah that's not bad, I just want to know what pieces those are. That one looks kind of complicated, like there's two fittings.

This looks promising. Will the RO tubing fit snugly in that fitting?

I’m in the middle of my home remodel, walls are wide open right now, and I’m setting up the RODI system. What is the absolute best way to connect my RODI to the copper pipe plumbing? I usually use the saddle valve, but I can literally plumb anything right now. Walls wide open and contractors...

My idea for the reservoir is to add a pump and drag a hose from the garage all the way into the house to where the tank is to fill it up as the last step of the water changes. I don't think it's going to be very economical to heat the 300G water up, so hoping the tank will just deal with it. I'm...

I think the minimum delivery is 300G at a time, so I'll need a 300G reservoir. It will probably last me a long time, though I'm hoping it won't go "bad" over time, but NSW should be pretty stable. I may run a circulating pump on it just because. Yes, setting up the ELOS at some point. My house...

I am planning on taking @Kensington Reefer's advice and going with NSW for my next tank, and it sounds like I'll need to get 300G delivered at a time. I should be able to carve out space in the garage. I want something that will be 7' tall or so (not flush with the ceiling) and as low profile...