Still trying to decide on using an external - vs- a internal pump for the new tank. I was leaning towards external due to the reduced heat factor. But I'm open to suggestions. The main tank is 180-190 gallon peninsula style tank. I'm thinking the fuge will hold about 50-75 gallons. And the pump will need to push the water up about 5' from the floor up and over the top. I'm also thinking plasma lights, so hopefully it'll be cooler than MHs. But what I'm most concerend about is in this order:
1st: Energy Efficient: Operational Power Consumption
2nd: Quiet Operation: Should be very quiet, it's in my living room
3rd: Cool Operation: should not add too much to tank's heat load
4th: Cost Efficient: but the other things trump this requirment
I'm still open to the actual GPH, but would rather have too much flow than a borderline pump.
1st: Energy Efficient: Operational Power Consumption
2nd: Quiet Operation: Should be very quiet, it's in my living room
3rd: Cool Operation: should not add too much to tank's heat load
4th: Cost Efficient: but the other things trump this requirment
I'm still open to the actual GPH, but would rather have too much flow than a borderline pump.