Our mission

BillT's 20 gallon

BillT

BillT

Guest
BARcard
So, coming from a 90 gallon with a refugium and chambered sump, Ca reactor, auto RODI topoff, O3, ect I'm going small time with this 20 gallon set up. I've been recently transferred from SLC where I've been reefing since 2003. I'd be lying if I told you I'm not a bit nervous about this, but willing to take advice from those of you who have a smaller system; I've always heard that smaller is harder. This tank is a tetra 20 that I painted the back black last night, using acrylic paint and a brush.

More details to follow, this is my start. :)

3cb92a6f8cfb82ccf27e4c02c7530d4c.jpg


Sent from my SM-N910T3 using Tapatalk
 
Here are a couple of more pics.

20#'s of CaribSea base rock, Hydor 240 and 20#'s of CaribSea Fiji pink sand.
065249aadd7fdc0c6e8a521a8936d662.jpg


5046fb4442ae9908d4eed86061e95c5c.jpg


Sent from my SM-N910T3 using Tapatalk
 
Tank is filled for it's water test, so far, so good!
97738e7b931e78cc61b4070c8c7e9907.jpg


Also getting this dusted off!
5f71e10d9a54b937d1257d9773f951ba.jpg


Sent from my SM-N910T3 using Tapatalk
 
Looking good Bill! Youre off to a good start.

Biggest most common issue for new hobbyists is they try to fill their tanks up way too fast. Then they run out of room to add stuff.
 
Thank you! Absolutely! I'm wanting to take it slow and easy, plenty of time to set up the perfect home for new roommates! At this point, waiting on my AI rails to show up...slow and steady. Just very happy to have a body of water by my desk again.

I've got my Apex running my heater and will calibrate my pH probe tonight once I get my temp up...man, I've missed the hobby!

Sent from my SM-N910T3 using Tapatalk
 
Planning on having ATO? The salinity fluctuation will be more noticeable on a 20g than on your previous tank. Just asking since you have an Apex and such going on. My current tank is my first with ATO and I LOVE LOVE LOVE it. Actually, this is my first tank at work so I am not there weekends which could have a lot to do with my love of the ATO.
 
The cool thing about my job is that I only go into the office two days a week, but an ATO is certainly an option. This tank is at home. :) But, I'll want to automate as much as possible, for obvious reasons. :) I'll be honest though, I'm lost without a sump...This too may change.

Sent from my SM-N910T3 using Tapatalk
 
After watching this http://www.mrsaltwatertank.com/bacteria-in-a-bottle-functional-or-fake/
I decided to go the fishless cycle route with the Dr. Tim's One and Only.

I went to Dale's Ace Hardware in Fremont and picked up a quart of this:
d6a2ad3da6f35dc035ec980e4693f210.jpg

To find out how much I'd need to get my ammonia up to ~2 ppm, I put a gallon of water into a container and added 1 drop off the ammonia...tested the levels, and that's all that was required. My 20 gallon tank, after adding sand and rock is 16 gallons, so, 16 drops. I'll be adding the Dr. Tim's One and Only tomorrow when Amazon delivers.

Here's how the tank looks now...I'll 'scape it later, lol.
2263cb5911605e127c912ddff04b886b.jpg


If this is successful, I have a ton of ammonia if anyone wants it. [emoji6]

Sent from my SM-N910T3 using Tapatalk
 
Lol that is a lot of ammonia. You can get Dr tim ammonium chloride for $2 that give exactly 2ppm for 1 drop per gallon.

Sent from my SM-G920P using Tapatalk
 
Just a quick update. My AI Rail came in...now gotta get to storage and find the machine screws...wish me luck please. Worse case scenario, Home Depot here I come.


235162d79dc9d62d606999d9b4cb49e3.jpg


Sent from my SM-N910T3 using Tapatalk
 
You must log in or register to reply here.
Back
Top