Small issues...
So about 11 days or so ago I noticed my alk jug was empty. Probably had just ran out. So I topped that jug off to match the level of my ca jug. Fast forward 9 days and I took a look at the jugs and the alk was empty again.
But the Ca jug was the same level. Uh oh - somethings wrong. Well my BM 3 channel doser pump assigned to Ca was dead.
Did a test and 300. Uh oh, replumbed Ca to the Mg channel and upped the dose to raise about 25ppm a day. No big deal.
Tonight I look in and all is fine except this one beautiful violet milli frag is like cream colored. Uh oh. All else ok though. A little investigation shows I had allowed the peri tube to fold over and pinch the line. So no Alk for 2 days - and test said 4 (down 3 degrees.)
Got everything squared away again and set Alk to raise a degree per day.
Too fast? Too slow? I have no experience in this zone and want to get out of it as safely as possible.
So about 11 days or so ago I noticed my alk jug was empty. Probably had just ran out. So I topped that jug off to match the level of my ca jug. Fast forward 9 days and I took a look at the jugs and the alk was empty again.
But the Ca jug was the same level. Uh oh - somethings wrong. Well my BM 3 channel doser pump assigned to Ca was dead.
Did a test and 300. Uh oh, replumbed Ca to the Mg channel and upped the dose to raise about 25ppm a day. No big deal.
Tonight I look in and all is fine except this one beautiful violet milli frag is like cream colored. Uh oh. All else ok though. A little investigation shows I had allowed the peri tube to fold over and pinch the line. So no Alk for 2 days - and test said 4 (down 3 degrees.)
Got everything squared away again and set Alk to raise a degree per day.
Too fast? Too slow? I have no experience in this zone and want to get out of it as safely as possible.