Eric's IM 40L aio

[Srt4eric]

Vectra s2 would be crazy overkill and unnecessary. You’d have to make sure to calibrate so it didn’t have a chance of spray out of your tank.

Thanks. That's exactly what I wanted to know.

 

[Srt4eric]

So its wet..

 

[Srt4eric]

I'm going to add two more xr15s once my frag tank is broken down and the corals are in.

 

[popper]

Get 2 pumps for redundancy.

 

[Srt4eric]

Got the new V2 mini Trident set up and running!!!!

 

[Zumareef]

So its wet..


View attachment 46136

Nice aquascape.

 

[Srt4eric]

Added more live rock to hopefully deal with a slight ammonia spike. I also hooked up all my lights. I've got them set to 5% intensity right now. I don't have any coral in there and I need the par meter.

 

[PeetaJai]

Never seem that trident before.

 

[Srt4eric]

Never seem that trident before.

I made it.

 

[Srt4eric]

Never seem that trident before.

 

[PeetaJai]

View attachment 46335

Sick! I dig it. Very clean!

 

[IOnceWasLegend]

If anyone's interested in trying it and wants to pay for the filament (it uses up almost an entire roll), I'll print one or two before the next swap.

 

[Srt4eric]

If anyone's interested in trying it and wants to pay for the filament (it uses up almost an entire roll), I'll print one or two before the next swap.

I probably most definitely will void your warranty

 

[grizfyrfyter]

If anyone's interested in trying it and wants to pay for the filament (it uses up almost an entire roll), I'll print one or two before the next swap.

That seems like a lot more material than should be necessary. Is it printed solid?

 

[IOnceWasLegend]

I probably most definitely will void your warranty

You are good at voiding warranties.

That seems like a lot more material than should be necessary. Is it printed solid?

It's recommended to print at 38% infill. I think it wound up being like 800g for all the parts when all was said and done

 

[Chromis]

Added more live rock to hopefully deal with a slight ammonia spike. I also hooked up all my lights. I've got them set to 5% intensity right now. I don't have any coral in there and I need the par meter.

Adding some carbon source (vinegar etc) might help the bacteria grow faster too...

I like the modified Trident. I too usually just leave the tray out because it's such a pain to get all the tubes back in without crimping - I really wish they'd change the form factor (and 100 other things).

 

[Srt4eric]

I ordered 5 mangroves off of ebay for $25 with free shipping. Received 7 today!!!

 

[Srt4eric]

I printed a couple flexible random flow Generators. These things are pretty neat.

View this content on Instagram

View this content on Instagram

 

[richiev]

I printed a couple flexible random flow Generators. These things are pretty neat.

View this content on Instagram

View this content on Instagram

Flexible filament for that is very clever. I've printed them in PET-G and the tolerances are a nightmare. Half the time it's too big and falls off the other half of the time it's slightly too small and cracks. One in a billion prints where it's usable.

 

[Srt4eric]

Flexible filament for that is very clever. I've printed them in PET-G and the tolerances are a nightmare. Half the time it's too big and falls off the other half of the time it's slightly too small and cracks. One in a billion prints where it's usable.

Yea, TPU is a game changer for these. I plan on printing a bunch to hand out at the next cfm.