Cali Kid Corals

Joe's Reef Journey

The first prototype was too small and the closed bottom was not circulating aerated water. The pic below is the revised version with the completely open bottom.
The top cap is glued to prevent air leakage and a tiny hole is drilled. It is very quiet. :)

1664304597725.png
 
Last edited:
Joseph Lee said:
Since favia is an encrusting coral, I created this stackable 3d printed ball that can grow with the coral without being an eyesore.
The picture on the far right is showing the coral on the first layer. Hope I get a beautiful ball-shaped favia in a year. :)
Click to expand...
Are your layers connected or will you add a separate layer once the top one is grown over? A couple students asked if they could stack frag discs "like a fancy cake" with the base getting larger at the bottom of the stack, but most of our discs are thin. Interested to follow your progress!
 
MolaMola said:
Are your layers connected or will you add a separate layer once the top one is grown over? A couple students asked if they could stack frag discs "like a fancy cake" with the base getting larger at the bottom of the stack, but most of our discs are thin. Interested to follow your progress!
Click to expand...
I have a cyphastrea that encrusted a 2” disk completely. Wanted to give it more space to grow so I’ve added a new 2” disk every month. I think we’re on the 5th disk. Kinda looks like a cake lol check back in a year and we’ll have the leaning tower of cyphastrea

@Joseph Lee love the idea of encouraging growth in a particular pattern
 

Attachments

  • 1CB3BB96-D04A-4E48-B8C6-A70ADF9258B5.jpeg
    1CB3BB96-D04A-4E48-B8C6-A70ADF9258B5.jpeg
    63.1 KB · Views: 150
I tried doing something similar with a sunset monti and a dead acro skeleton I got from the store. Didn't quite work as well as I wanted since it kinda filled in the gaps rather than just encrusting the branches. So your idea likely will work better!
 
tankguy said:
Im following your footsteps and set up a 40 breeder. LPS corals for this one. Nice to see your tank recovering
Click to expand...
Hi Tankguy If you don't mind covering the back side of the tank, one or two Aquaclear 110 with a small heater and media will be easier to maintain (vs canister filter) . :)
 
MolaMola said:
Are your layers connected or will you add a separate layer once the top one is grown over? A couple students asked if they could stack frag discs "like a fancy cake" with the base getting larger at the bottom of the stack, but most of our discs are thin. Interested to follow your progress!
Click to expand...
I will need to add a separate layer. : )
B the Nano Reefer said:
I have a cyphastrea that encrusted a 2” disk completely. Wanted to give it more space to grow so I’ve added a new 2” disk every month. I think we’re on the 5th disk. Kinda looks like a cake lol check back in a year and we’ll have the leaning tower of cyphastrea

@Joseph Lee love the idea of encouraging growth in a particular pattern
Click to expand...
You can call it Pisa sometime next year!
Darkxerox said:
I tried doing something similar with a sunset monti and a dead acro skeleton I got from the store. Didn't quite work as well as I wanted since it kinda filled in the gaps rather than just encrusting the branches. So your idea likely will work better!
Click to expand...
Very cool idea. I think it could work with a staghorn acro skeleton.
 
Updates 10/31/22

The toadstool coral is so big today! I want to keep this one as long as I can but I don't know how much longer I can keep it. :oops:
1667195540281.png


Water parameters are looking good.
For phosphate, I have been dosing 0.02ppm daily for about 3 weeks (via top-off reservoir) and it looks like I need to add maybe 0.01ppm more (daily).
Happy to see that the NO3 level is decreasing, I guess I am starting to have a healthy population of anaerobic bacteria. :D
1667258270739.png
 
You must log in or register to reply here.
Back
Top