Jestersix

Please help this Scoly

bluetang_2000

bluetang_2000

Supporting Member
BARcard
Have this scoly for a while but it’s not doing so well, not sure if it’s just the bubble algae or something else too. Hopefully the fox face that I will be receiving tomorrow will take care of the bubble algae issue, but any suggestions to nurse this scoly back to healthy?
 

Attachments

  • IMG_4693.jpeg
    IMG_4693.jpeg
    94 KB · Views: 85
Not sure what to do if the mouth died. Hope it recovers and regrows I guess? Might be worth some sort of dip after manually removing hair and bubble algae. Not sure what dip might be best or if that’s even a good idea
 
Srt4eric said:
Is that algae growing in the center?
Click to expand...
I was wondering that too. First step would be to figure out if that’s just a clump stuck in there, or if your Scoly is now donut shaped.

Hoping for the former, my next step would be to take the Scoly out and manually remove the bubble algae which is certainly irritating it. You could do a kfc or restor dip, but I would put it in a low light spot in the tank and just hope for the best once you’ve cleaned the algae.

If the center/mouth is dead it will be much tougher, but it’s still alive so there’s hope.
 
Since the mouth is gone, a riskier but possibly higher reward thing would be to manually remove the bubble algae and the mouth algae, inspect the interior, and then potentially do a hydrogen peroxide dip to kill any algae you missed.

Otherwise things look grim I'm sorry to say. But hopefully with the algae gone, it can close up and regrow internally.
 
What I woud do is probably do a peroxide dip so that will kill the algae. And than remove with a twizer the bubble algae.
Maybe you can also try to cut it through the middle. Careful with the flesh not to press it down.

I did an experiment with 4 of my scollys in the past. There was an article showing you can cut on the buttom of the scolly and another scolly can form. And I did it to all 4 but from only for one of it grew a new moth on the buttom of it. But I was gone for 3 months and it got covered in the bubble algae and it died.

Also read here: https://www.reef2reef.com/threads/s...ton-looking-for-first-hand-experience.703396/ maybe you get some tips.
 
To me it looks like it’s slowly dying/receding and the algae is just taking over the new real estate. You should remove the algae by hand as much as you can and see how it goes. Tweezers, toothbrush. Maybe peroxide dip. It’ll probably die, but it’s worth trying to save.
 
How is your scoly doing?

Here I found the article that was showing how they manage to propagate scolys :). Very interesting. I bet a lot of people don't know about this.
reefbuilders.com

Ultra Coral Australia propagates Homophyllia from the bottom up | Reef Builders | The Reef and Saltwater Aquarium Blog

Captive propagation of Homophyllia australis isn’t as easy as many other corals. Being a single polyp LPS coral, cutting through it with a coral saw usually ends in its demise. They have been captive…
reefbuilders.com
Here is another one that I found in the past talking about it:
bostonreefers.org

Experimental propagation of my scolymia

Hi guys, Earlier today, I found a couple baby sun coral polyps on the bottom of my scoly's skeleton when I tried to re-position it on the eggcrate. Ive been meaning to flatten its skeleton for awhile now for ease of handling/feeding if its flat and level. So on the saw it went. Nice cut I...
bostonreefers.org bostonreefers.org
 
This feels a little risky for the average hobbyist to try, but if you’re willing to risk it i think this is pretty cool

I saw some stuff about this method a while back and didn’t think about it again until now. I definitely like this method more than pizza slice shaped scolys
 
You must log in or register to reply here.
Back
Top