Jestersix

Today I 3D printed…

Baykes

Baykes

Supporting Member
BARcard
…a feeding port for my screen cover

3D7B19DB-19CA-4A4B-9066-9A8EA7134C5D.jpeg


1147B156-0207-4746-82BC-3295C02B6BE5.jpeg


No noticeable sag from adding the port. Nice to not have to take the whole lid off for feeding (lazy).

Everything including the screws were printed. Used black PETG. Used the files from here: https://www.thingiverse.com/thing:4629938

Found it in this nice compilation of aquarium 3D printed parts: https://humble.fish/community/index.php?threads/3d-printed-parts-aquarium-archive-thread.3032/. (One of our own @Srt4eric has a contribution included in this compilation. Nice to be in the presence of a celeb lol)
 
If you don’t have a printer, they also have this.

www.bulkreefsupply.com

Screen Top Feeding Portal

Add a Screen Top Feeding Portal from Neat Aquatics and say goodbye to dried-on, smelly food bits getting stuck to your screen top netting. The Screen Top Feeding Portal is the ultimate convenience-enhancing accessory for your screen top. The portal provides a secure solution for feeding that...
www.bulkreefsupply.com www.bulkreefsupply.com
 
RandyC said:
If you don’t have a printer, they also have this.

www.bulkreefsupply.com

Screen Top Feeding Portal

Add a Screen Top Feeding Portal from Neat Aquatics and say goodbye to dried-on, smelly food bits getting stuck to your screen top netting. The Screen Top Feeding Portal is the ultimate convenience-enhancing accessory for your screen top. The portal provides a secure solution for feeding that...
www.bulkreefsupply.com www.bulkreefsupply.com
Click to expand...
Yep this product is what made me look for a similar design on thingiverse. Definitely a good option if you don’t have a printer or don’t want to hassle with PETG (it can be a pain to print with ime)
 
Baykes said:
…a feeding port for my screen cover

View attachment 25047

View attachment 25046

No noticeable sag from adding the port. Nice to not have to take the whole lid off for feeding (lazy).

Everything including the screws were printed. Used black PETG. Used the files from here: https://www.thingiverse.com/thing:4629938

Found it in this nice compilation of aquarium 3D printed parts: https://humble.fish/community/index.php?threads/3d-printed-parts-aquarium-archive-thread.3032/. (One of our own @Srt4eric has a contribution included in this compilation. Nice to be in the presence of a celeb lol)
Click to expand...
That's awesome. I was laughing at being called a celeb just to be clear. What printer do you have?

(That favia is ready by the way. I just keep forgetting to text you)
 
Srt4eric said:
That's awesome. I was laughing at being called a celeb just to be clear. What printer do you have?

(That favia is ready by the way. I just keep forgetting to text you)
Click to expand...

No worries, thats how I took it lol. I have the monoprice maker select plus, which is a rebrand of the Wanhao Duplicator i3. It had been down for awhile, but a friend working on his got me motivated to tinker again. Also Octoprint is an awesome upgrade that makes it a lot more enjoyable to use.

And thanks, I will reach out about the favia! The cyphastrea is doing good and encrusting a decent amount now
 
Hey William, for the thingverse stl file it have "raft". I cannot find the option in Cura to disable the raft. Any clues?

My first PETG print works well, but raft get fuse to the main print. I am trying not to use raft with PETG. PLA is fine, probably because the lower nozzle temp
 
newfly said:
Hey William, for the thingverse stl file it have "raft". I cannot find the option in Cura to disable the raft. Any clues?

My first PETG print works well, but raft get fuse to the main print. I am trying not to use raft with PETG. PLA is fine, probably because the lower nozzle temp
Click to expand...
Not sure, I dont see a raft when I load it in Cura, and I can toggle through different plate adhesions. When I printed I only used a Brim, no raft was done. Do all 4 files have the raft or just a particular one? Maybe it is a weird Cura setting/version issue? I am running 4.8.0
 
Baykes said:
…a feeding port for my screen cover

View attachment 25047

View attachment 25046

No noticeable sag from adding the port. Nice to not have to take the whole lid off for feeding (lazy).

Everything including the screws were printed. Used black PETG. Used the files from here: https://www.thingiverse.com/thing:4629938

Found it in this nice compilation of aquarium 3D printed parts: https://humble.fish/community/index.php?threads/3d-printed-parts-aquarium-archive-thread.3032/. (One of our own @Srt4eric has a contribution included in this compilation. Nice to be in the presence of a celeb lol)
Click to expand...
Very cool!
 
You must log in or register to reply here.
Back
Top