I do find that a CO2 scrubber much more effective for my tank than kalk -or rather due to the CO2 abundance -kalk is fairly ineffective unless I really add in a lot which then causes alk swings and salinity issues.
However my attempts to create a recirc CO2 scrubber system has met some obstacles.
In the system, I tape up the skimmer lid, a 1/2 inch OD hose goes from lid to a moisture chamber then feeds into the BRS CO2 scrubber and then feeds back into the venturi (with a T connector from the air silencer). The issue is the humidity. The CO2 canister still looks like a sauna and it pretty much KO's the CO2 media within a week.
The next step I can figure is get another chamber and fill with a gel desiccant after the moisture chamber. But I think the RH will eat through the desiccant. Any input on how to get this working right appreciated.
TIA
However my attempts to create a recirc CO2 scrubber system has met some obstacles.
In the system, I tape up the skimmer lid, a 1/2 inch OD hose goes from lid to a moisture chamber then feeds into the BRS CO2 scrubber and then feeds back into the venturi (with a T connector from the air silencer). The issue is the humidity. The CO2 canister still looks like a sauna and it pretty much KO's the CO2 media within a week.
The next step I can figure is get another chamber and fill with a gel desiccant after the moisture chamber. But I think the RH will eat through the desiccant. Any input on how to get this working right appreciated.
TIA