Recent content by kinetic

That's what happened to me haha! They're beautiful, so at least there's that.

I have a lot of closer interest, but if those fall through, i'll let you know. I might have to go down to San Jose to pickup some suction cups to move a tank :)

Hey Michael, I'm in Albany, CA.

I have a rock with 6 rainbow BTA's. They all split from a single one I got from Aquatic Collection about 8 years ago. Honestly, these look brighter than a typical rainbow, but I'm not going to try to upsell it as something fancier than that. They are beautiful. I have put them next to my CSB...

I wanted to report that I have successfully set up the RODI with these pieces: https://www.amazon.com/John-Guest-Speedfit-PSEI6012U9P-Compression/dp/B06XG3ZHGM?ref_=ast_sto_dp&th=1 https://www.amazon.com/JG-Speedfit-PP061208WP-8-Inch-Reducer/dp/B005S4OP04/ref=sr_1_8 That speedfit compression...

Yeah it looks like it's made for the conversion. I will just need this to reduce from 3/8 to 1/4 I'm thinking: https://www.amazon.com/JG-Speedfit-PP061208WP-8-Inch-Reducer/dp/B005S4OP04/ref=sr_1_8

These are the pieces: https://www.homedepot.com/p/BrassCraft-1-2-in-Compression-Inlet-x-3-8-in-Compression-Outlet-1-4-Turn-Angle-Valve-G2CR19X-C1/202047059 https://www.homedepot.com/p/Everbilt-3-8-in-x-1-4-in-OD-Compression-Brass-Reducing-Coupling-Fitting-801229/207176921 Will any of these work...

I have had the first generation one for awhile, controlled by an Apex. No issues other than the mixing pump failing and then when I got a new one, that failed too. The new tank setup is getting this installed in the sump's return chamber. I'll have a more reliable powerhead in that chamber, and...

Part of the home remodeling work was to get it ready for the fish tank. I have a water source that has a reducer that is two parts that goes down to the 1/4", but the fitting won't securely hold an RO tubing line under pressure. What do I need to get this to connect properly?

amazing, thank you!

Tractor supply only has the 300 gallon. While it would fit, it's not super ideal, and I only need/want a 200 gallon. But either way, I'm happy paying the $55 shipping from Home Depot, but before I pull the plug, just hoping to see if anyone used this specific tank and had experience with it...

I'm planning out a holding tank for NSW deliveries and have a 34" wide x 34" deep x 92" tall area to put a tank as big as possible. I found a bunch online but they're normally about $400 + $400 shipping, but on Home Depot they sell these Chem-Tainer versions with only a $55 delivery fee. This...

I have the PayPal receipt, but I got a note from Barcode that my membership expired. It was an automatic payment. BTW: I know it says contact someone on BOD, has a link but that link to the list doesn't give me permission to view. And I guess I can just look on forums until I find someone on...

alright, I ordered these. I'll see if it works with the contractors, otherwise it'll be easy to return. Thank you!

Yeah that's not bad, I just want to know what pieces those are. That one looks kind of complicated, like there's two fittings.