High Tide Aquatics

Neptune trident advanced replacement

Got the new silicone tube in the mail and did a more complete refurb replacing all the tubing that was old and stiff from the unit being in the desert. Time to plug it in and see if I can get it to work again. I'm getting good at talking these apart. Maybe I tell Neptune to send me units to refurb as a part time job, lol.

1000001690.jpg
1000001691.jpg
 
Going to ask @H2OPlayar -how much you charge? My unit just coughed up a fail B error!
No kidding.,


Trust you over aperture!

See if I can fix it myself first but every time with that error -last time no dice. This is the third unit in 3 years to fail. 2nd with that failure .

First unit, failed -replaced under warranty
2nd unit-flooded- refurbish plan
3rd unit-test b failure now

Ugh
 
L/B Block said:
Going to ask @H2OPlayar -how much you charge? My unit just coughed up a fail B error!
No kidding.,


Trust you over aperture!

See if I can fix it myself first but every time with that error -last time no dice. This is the third unit in 3 years to fail. 2nd with that failure .

First unit, failed -replaced under warranty
2nd unit-flooded- refurbish plan
3rd unit-test b failure now

Ugh
Click to expand...
@Ayman i heard you're pretty good at getting these things going too
 
L/B Block said:
Going to ask @H2OPlayar -how much you charge? My unit just coughed up a fail B error!
No kidding.,


Trust you over aperture!

See if I can fix it myself first but every time with that error -last time no dice. This is the third unit in 3 years to fail. 2nd with that failure .

First unit, failed -replaced under warranty
2nd unit-flooded- refurbish plan
3rd unit-test b failure now

Ugh
Click to expand...
Try running through the Neptune debug online and seeing if there is an obvious failure point, ie is one reagent not filling properly, or what's going on there. I bought a second hand Trident to mess around with and for spare parts in case the main one goes down.
 
H2OPlayar said:
Try running through the Neptune debug online and seeing if there is an obvious failure point, ie is one reagent not filling properly, or what's going on there. I bought a second hand Trident to mess around with and for spare parts in case the main one goes down.
Click to expand...
my new unit also has a B failure after changing reagents. It looks like no reagent is being drawn. Seems like my unit is functioning like normal besides testing the B. If I don't care that the B is not working does it matter?
 
If you end up having to open and replace stuff a lot you might want to swap the housing. Everything is super easy to get to.
 

Attachments

  • IMG_7488.jpeg
    IMG_7488.jpeg
    111.9 KB · Views: 10
  • IMG_7487.jpeg
    IMG_7487.jpeg
    127.4 KB · Views: 10
  • Like
Reactions: JVU
iani said:
my new unit also has a B failure after changing reagents. It looks like no reagent is being drawn. Seems like my unit is functioning like normal besides testing the B. If I don't care that the B is not working does it matter?
Click to expand...
Try flushing rodi through the intake and out each of the reagent tubes and outlet, with them removed from the reagents. You do this by depressing two of the solenoids with your fingers and you push a syringe of rodi through the intake tube.
 
You must log in or register to reply here.
Back
Top