Cali Kid Corals

210 gallon Dream tank

MichaelB

Supporting Member
I suppose it's proper to offically start this thread hear as a continuation of the dialouge began in the bst fourm concerning this tank linked below.


Just to be clear I don't have the tank yet. I expect to began the proccess sometime this month.

Yet the issues with this tank and the Palythoas and the palytoxin risk I feel may possibly be helpful as a refrence point to someone else in the future.

20241110_143742.jpg

20241110_135936.jpg


The tank in all it's glory on my initial vist to check it out.

20241110_143742.jpg
20241110_135936.jpg
 

Attachments

  • 20241110_144346.jpg
    20241110_144346.jpg
    53.1 KB · Views: 38
  • 20241110_144406.jpg
    20241110_144406.jpg
    74.8 KB · Views: 39
  • 20241110_144354.jpg
    20241110_144354.jpg
    67.3 KB · Views: 39
  • 20241110_144313.jpg
    20241110_144313.jpg
    50.7 KB · Views: 34
  • 20241110_143828.jpg
    20241110_143828.jpg
    63.9 KB · Views: 36
  • 20241110_143758.jpg
    20241110_143758.jpg
    86 KB · Views: 42
  • 20241110_143751.jpg
    20241110_143751.jpg
    39.4 KB · Views: 40
  • 20241110_143746.jpg
    20241110_143746.jpg
    126.1 KB · Views: 41
So based on many conversations about how to safely remove the Palythoa rocks from this tank. I have obtained 3 55 gallon food grade screw top barrels. I wanted to wait but I couldn't pass up the chance to get these, and they were far cheaper than totes and other options would have been.

The addtion of them being water tight with gaskets helps me not need to worry about vapors escaping once they are sealed up. Plan is to careful place rocks in these without water. For travel to my house where I will than add water and bleach them.

I would not have the means to lift these full of rocks and water even with help. Rocks alone should be easily done with 2 people to lift them.
20241116_144956.jpg
20241116_145008.jpg


These buckets will eventually be my own rodi storage and mixing Station once bleaching process is done.

The tank comes with two barrels that were part of that system, They have holes in them for the plumbing already so wouldn't be air tight for transport.

Those coming with the tank I plan to either trade, sale cheaply, pay it foward - still undecided yet. (This Is in no way a sales pitch, however if you may be intrested in them at some point let me know)

As far as gear l have have on the my future Amazon list for safely:

Screenshot_20241116_155550_Amazon Shopping.jpg

25 inches long for scraping/cutting the Palythoas of the tanks glass while still submerged.

Screenshot_20241116_155616_Amazon Shopping.jpg

For safe removal of the Palythoa rocks.

Screenshot_20241116_155607_Amazon Shopping.jpg

For respiratory protection, $29 for two of masks with filters including carbon.

Screenshot_20241116_155716_Amazon Shopping.jpg

This pump I already have, it works so well I can't use it on my 32biocube for water changes for a 200 gallon tank it would be a heck of alot faster than a gravel vacum.

Currently my pump has a 5 nylon hose only to move water to/from buckets right next to the tank.
Screenshot_20241116_155629_Amazon Shopping.jpg
Screenshot_20241116_155640_Amazon Shopping.jpg

The practical plan I'm leaning towards is to not risk dumping 150+ gallons of potential contaminated water in their backyard using their existing hard plumbed water change system.

I plan to add 25 ft hose to the 5ft one already on the pump using the double barbed fitting in later picture. I this it's better to drain the water in to a sink, tub, or a toliet even. To keep their dog safe that plays in their back yard.

So the rest of this saftey gear I will grab soon.
 
Last edited:
Good bit of labor to do, but it'll be worth it!

In addition to the advice here, when you start working on your fish stocking plan there's an excellent thread here on Humblefish to make sure your stocking plan will work/you'll minimize issues between fish.
 
Good bit of labor to do, but it'll be worth it!

In addition to the advice here, when you start working on your fish stocking plan there's an excellent thread here on Humblefish to make sure your stocking plan will work/you'll minimize issues between fish.


All fish in 65 are making the journey over to new tank in future, so no thoughts on fish yet lmao.

New tank is coming with fish I won't be keeping, someone prememptively reached out to me about them but nothing is locked in offically yet. So they would be available as well.
 
IMHO
I would toss and or dry paly rocks for later use
Safety first
But I have touched way more paly rocks than I can remember
With much less “fear” with no I’ll effects
Gloves and eyewear are recommended
More for the bristleworms and the unseen vermetid snails

Paly toxin IS real and dangerous
Just don’t lick your fingers or wipe your face while doing the deed
Good luck
 
Tank was successfully broken down. Palythoas were scraped/ cut from the glass. Palythoa rocks removed in totes ready for bleach soak for a week.

Sump rocks were saved and plan to keep them wet and live no Palythoas on them.

Fish and select coral rescued. Hopefully the 32 biocube #2 i set up last night is sufficent for them until I can sale/ rehome most of them

I would have probably been in over my head without the awesome help of @Coral reefer. Otherwise it would have taken 2-3 times longer to do than I was expecting.

We even managed to get the entire tank moved from the house to the garage for easier pick up.
 
Last edited:
Very long day but exciting news.

20241208_192320.jpg

It's finally in my house. Special thanks to @Srt4eric who made it all possible.

Screenshot_20241208_193847_Chrome.jpg
He saw it and told me just about right away it was actually 210 gallons not 200 :) and gave me a link to the specific tank type.

20241208_192522.jpg20241208_192515.jpg
Tons of gear to sort through half I don't honestly know what it is but part of the fun I suppose.
20241208_192320.jpg
20241208_192359.jpg20241208_192350.jpg
I will have my work cut out for me trying to clean this up. Vermatids in over flow sections, and a fair amount of corline alage on the glass.

If it wasn't such a large tank I would fill it and run critic acid, i think i have to resort to citirc acid in a spray bottle and patience. I wouldn't wanna consider paying for the amount of citric acid it would take to properly concentrate it in 200+ gallons of water.

Tomorrows plan is:
1.) unpack the random gear to identify what's all there.
2.) Get the overflow plumbing soaking in critic acid.
3.) If I have enough motivation dump the bleach water from the rocks that have been soaking for a week and get them drying out.

There are multiple plumbing peices I will need to order for the tank and a even longer list that I haven’t even started yet.

Woohoo the dream tank has offically arrived.
 

Attachments

  • 20241208_192330.jpg
    20241208_192330.jpg
    149.3 KB · Views: 36
20241214_162821.jpg20241214_163106.jpg20241214_162901.jpg

I was able to get the sump for this tank today. It has a crack on the top of it I will need to patch up with acrylic. Visible in some of the pictures.

I was advise people often put bulk heads in the drain portion of the sump where the 3 holes are. This is something I may actually consider for a cleaner install if I can figure out what size bulkheads I need for it.

I recently tried ordering bulkheads for the drain of the tank and rofl I ordered 3/4 inch ones they arrived and I felt dumb. When I saw how small they were. So I will need to figure out the actual size of the ones I need.
Screenshot_20241214_181014_Amazon Shopping.jpg
I have two for the smaller return pipes already. The two I need are for the aqueon overflow drain pipes.
 
So to make sure I understand correctly, I just need to measure the hole cut into the glass under the tank? And that will tell me what bulkhead per this chart?

I have the old bulkheads but the bottom have broken pipes in them that was glued in with pvc glue. So wouldn't work in terms of under the tank to the sump.

20241214_185838.jpg20241214_185852.jpg20241214_185909.jpg

Also another question about the return lines bulkhead gasket.

Should there be a gasket for the outside of the tank in addtion to the one inside the overflow box like a sandwhich one on each side of the glass if this makes sense?
 
Back
Top