3D Printing Help

[B the Nano Reefer]

I have a Fluval aqua clear 20 running on a my 10 gallon frag tank. The stock nozzle for the intake that comes with the filter is too long so I need something similar that is less than half the length. Already had my clownfish sucked into the intake (he’s ok) and don’t want a repeat.

Is this something that someone has the means to easily 3D print? I don’t have dimensions but have the stock nozzle if that would be helpful for dimensions. Happy to compensate for material/time. Thanks!

 

[grizfyrfyter]

That should be easy to replicate. If you can't find someone close, let me know and I will help.

 

[B the Nano Reefer]

Thanks @grizfyrfyter will let you know!

 

[Joseph Lee]

Not sure if this is what you are looking for or not but this is what I did to shorten it. The fit is tight, worked really well.

 

[B the Nano Reefer]

Not sure if this is what you are looking for or not but this is what I did to shorten it. The fit is tight, worked really well.
View attachment 36719

Hmm, didn’t think about cutting it. Figured the nozzle wouldn’t fit cause it doesn’t have a wider diameter in the middle as the top. I’ll give it a try. Thanks!

 

[B the Nano Reefer]

Wasn’t pretty, and required some finessing but thanks @Joseph Lee for the solution

 

[Joseph Lee]

Glad it worked out for you!