Prince Shah
Supporting Member
I have read a lot and looked at the R2R forum and concluded that GHL is built like a tank and its robust which is what you need for automation.
I have a small system WB 80.4 and wanted to automate following stuff
- Protein skimmer overflow protection using sensor
- Fill the 16 gallons RO water using a schedule (and prevent overflow with a sensor)
- Measure parameter and tmp
- Notification for the pump, fan, lights etc failures. (Currently, I have 2 AI HD, 2 Nero, 2 Temp, 1 UV, 1 Protein Skimmer, 1 ATO, 1 Fuge lights, 1 Fan (cooling), 1 cabinet light) So I guess I will need to buy extra power bar
Having said that which model you would recommend. I never had any controller on my tank. I most run LPS but slowly planning to go to SPS.....
PROFILUX 4 CONTROLLER INCLUDES
I have a small system WB 80.4 and wanted to automate following stuff
- Protein skimmer overflow protection using sensor
- Fill the 16 gallons RO water using a schedule (and prevent overflow with a sensor)
- Measure parameter and tmp
- Notification for the pump, fan, lights etc failures. (Currently, I have 2 AI HD, 2 Nero, 2 Temp, 1 UV, 1 Protein Skimmer, 1 ATO, 1 Fuge lights, 1 Fan (cooling), 1 cabinet light) So I guess I will need to buy extra power bar
Having said that which model you would recommend. I never had any controller on my tank. I most run LPS but slowly planning to go to SPS.....
PROFILUX 4 CONTROLLER INCLUDES
- ProfiLux 4 controller, Black
- ProfiLux 4 power supply
- Water temperature sensor
- USB cable
- ProfiLux 4 controller, Black
- ProfiLux 4 power supply
- Water temperature sensor
- pH probe
- Redox probe
- Conductivity probe
- Powerbar 6E-PAB with PAB-cable 2m
- Calibration fluids (pH 7&9, 50ms, 220mV)
- USB cable
- Null plug
- ProfiLux 4 controller, White
- ProfiLux 4 power supply
- Water temperature sensor
- pH probe
- Redox probe
- Conductivity probe
- Powerbar 6E-PAB with PAB-cable 2m
- ProfiLux Touch with PAB cable 2m
- Calibration fluids (pH 7&9, 50ms, 220mV)
- USB cable
- Null plug