I see that it’s common to use ABS bulkheads for the overflow of an aquarium. What do people use to connect PVC pipe to an ABS bulkhead?
I’ve got a new 120 gallon acrylic aquarium with an internal overflow with holes in the bottom for overflow and return plumbing. It came with what I believe are ABS bulkheads and I am using PVC pipes for the plumbing. I bought some PVC bulkheads and two of them won’t seal completely and have threads that slip when I tighten the nut too much by hand. Unfortunately I didn’t discover that until the leak test *after* gluing all of the return pipe to the bulkheads
.
Any suggestions for using PVC pipe with ABS bulkheads? Unfortunately I probably don’t have any extra height to consider threaded bulkheads for an ABS to PVC transition. Or any other suggestions on how to deal with this situation? Do I just bite the bullet and glue PVC pipe to the original ABS bulkheads? (Even that will be a pain since the original bulkheads are a different length than the ones I used and plumbed everything to, but I’ll probably have to deal with that no matter what.)
I’ve got a new 120 gallon acrylic aquarium with an internal overflow with holes in the bottom for overflow and return plumbing. It came with what I believe are ABS bulkheads and I am using PVC pipes for the plumbing. I bought some PVC bulkheads and two of them won’t seal completely and have threads that slip when I tighten the nut too much by hand. Unfortunately I didn’t discover that until the leak test *after* gluing all of the return pipe to the bulkheads
.Any suggestions for using PVC pipe with ABS bulkheads? Unfortunately I probably don’t have any extra height to consider threaded bulkheads for an ABS to PVC transition. Or any other suggestions on how to deal with this situation? Do I just bite the bullet and glue PVC pipe to the original ABS bulkheads? (Even that will be a pain since the original bulkheads are a different length than the ones I used and plumbed everything to, but I’ll probably have to deal with that no matter what.)
