Cali Kid Corals

Dangalang Laundry Room Frag Tank

Alexander1312 said:
Did you connect the pump to the Hydros wave engine? If yes, which adapter cable did you use?
Click to expand...
I have the power connected to my Launch's A/C outlet and I don't use 0-10V for control, because my Launch doesn't have 0-10V Out and I don't feel the need for it in my situation.

Looks like this guy used the Hydros Quad 0-10V cable and the pump should be setup as a flow pump, not a return pump: https://forum.coralvuehydros.com/th...through-hydros-x4-controller-0-10v-port.2387/
 
dangalang said:
I have the power connected to my Launch's A/C outlet and I don't use 0-10V for control, because my Launch doesn't have 0-10V Out and I don't feel the need for it in my situation.

Looks like this guy used the Hydros Quad 0-10V cable and the pump should be setup as a flow pump, not a return pump: https://forum.coralvuehydros.com/th...through-hydros-x4-controller-0-10v-port.2387/
Click to expand...
I see. Thank you. I wanted to connect it directly with the pump output of the wave engine. Maybe I ask them if there is an adapter for this like they have for the gyres, VarioS etc.
 
Red Roses Montipora from Golden State Corals, one of those that looks meh under whiter lighting, but incredible under blues:

1743463028463.png


1743463038661.png
 
I wanted to eliminate shading on the acros and get some more spread since there is a big drop off in par when you get to the edges of the tank, so I picked up two AI Blade Grows from @B the Nano Reefer for a nice price.

I just did a quick setup to see how the shading would change and I think they help. I like the look of the spectrum so far too but will need to experiment with tweaking settings and getting the schedule figured out.

I also need to figure out how to mount. I bought the elevated tank mounts, but I think I want the lights higher so I can access the top of the tank easier for photos and glass cleaning. But that will be more complicated, and I foresee issues with algae growing faster in the Avast Plank tube. I bought the cover that Avast sells, but when I used it, my food would get soggy from the evaporation, so currently not using it.

1743629339456.png


1743629348478.png
 
dangalang said:
I figure I should do a journal for this tank since I have a few DBTC pieces in it. This frag tank started out as a way to get more corals and has evolved into a kind of a test bed for equipment and other things for a bigger tank that I plan to build.

Tank got wet around mid May 2024 and was started with 10 pounds of KP Aquatics starter live rock and some live rubble from Aquabiomics. I let it marinate for a month with no lights before putting the first test corals in.

36” x 22” x 14” Advanced Acrylic AIO

Equipment
Hydros Launch Controller
IOAOI Skimmer
AquaWiz KH Controller/Tester
Reef Breeders Nautilus DC300 Return Pump
Aquavitro Sentia Dose Dosing Pumps
VorTech MP10 Powerhead
Hydros Triple Level Sensor/Hydros Diaphragm Pump for ATO
Ranco Controller and Eheim Jager for Heat
Avast Plank Auto Feeder
Reefi Uno 2.0 Light

Livestock
Pink Streaked Wrasse (High Tide Aquatics)
Tomini Tang (High Tide Aquatics)
Saltwater Molly (Aquatic Collection) this is a surviving baby from a mom I bought at AQ
Turbo Snails
Trochus Snails
Astrea Snails
Nassarius Snail
Brittle Stars DBTC from @tribbitt

View attachment 67566

View attachment 67567
https://imgur.com/a/wEpmsrU
Click to expand...
IS this goni 2 color or the light?

What is this orange zoa. You got several.

If so, I want them. Name your price.

Screenshot_20250402_213628_Chrome.jpg
Screenshot_20250402_213612_Chrome.jpg

Screenshot_20250402_213505_Chrome.jpg
 
Last edited:
I think I have some sort of Hydroid, I can see them on the 3d printed frag plug post and on the under side of a monti. I thought they were little feather dusters at first, but on closer inspection I'm leaning towards hydroid. They don't have a hard tube to retract into like feather duster and the "feathers" look different. Doesn't seem to effect the monti so far.

Any suggestion on what it is and what to do? Leave it? Kill it with fire?

Hydroid Frag Riser Photo.jpg

https://imgur.com/a/DeQVbmK
Hydrois Montipora Photo.jpg

https://imgur.com/a/M6vHnOx
 
dangalang said:
I think I have some sort of Hydroid, I can see them on the 3d printed frag plug post and on the under side of a monti. I thought they were little feather dusters at first, but on closer inspection I'm leaning towards hydroid. They don't have a hard tube to retract into like feather duster and the "feathers" look different. Doesn't seem to effect the monti so far.

Any suggestion on what it is and what to do? Leave it? Kill it with fire?

View attachment 69406
https://imgur.com/a/DeQVbmK
View attachment 69407
https://imgur.com/a/M6vHnOx
Click to expand...
Oh $hit
Those are horrible!
Remove and destroy!
They will sting everything...including you
Handle with care
 
Kensington Reefer said:
@dangalang
What happened with the hydroids?

Frags...great growth, great color
But I hate the substrate
I wish they were on rubble or larger rocks
But that’s just me
Click to expand...
Did a hydrogen peroxide dip on the monti that seemed like it helped. I'm planning to brush full strength hydrogen peroxide on the underside of the monti, leave for like 30 seconds, dip coral in fresh saltwater, and repeat a few times.

I'm planning on printing new frag stands and replacing or dipping the frag rack that has them in hydrogen peroxide.

Also looking into fenbendazole, specifically fish flake with fenbendazole as a possible in tank treatment option.
 
You must log in or register to reply here.
Back
Top