Well,
I had posted a while ago looking for a pump to fit inside a 5 gallon water container. I finally found one that works.
I was at pet smart and found this one by Top Fin. It did not fit inside the opening until I clipped off some plastic where the suction cups attach. Keep in mind the maximum head height is 2.5 feet. So it is not perfect but if I put the contained on a chair it will make the head height about 2ft. It will flow slowly so as not to blast the fish or corals.
Most importantly it was perfect for refilling my ATO reservoir. Before i was pouring water into a bucket and then pumping it into the reservoir.
Here are some pics:
Adjustable neck for height. Perfect height for a 5 gallon bucket.
This is wear I cut off the plastic frame for the suction cups. Sorry, don’t have the before picture.
Pump in action with silicone tubing.
Packing label insert. Sorry, didn’t think ahead and do an unboxing pick.
It also has an on/off switch so you don’t have to unplug it to turn it off. I think I paid about $25 or so.
Gerry
Sent from my iPhone using Tapatalk
I had posted a while ago looking for a pump to fit inside a 5 gallon water container. I finally found one that works.
I was at pet smart and found this one by Top Fin. It did not fit inside the opening until I clipped off some plastic where the suction cups attach. Keep in mind the maximum head height is 2.5 feet. So it is not perfect but if I put the contained on a chair it will make the head height about 2ft. It will flow slowly so as not to blast the fish or corals.
Most importantly it was perfect for refilling my ATO reservoir. Before i was pouring water into a bucket and then pumping it into the reservoir.
Here are some pics:
![97062d9e2ba872bc8c4b123cbf568d7a.jpg](https://uploads.tapatalk-cdn.com/20210324/97062d9e2ba872bc8c4b123cbf568d7a.jpg)
Adjustable neck for height. Perfect height for a 5 gallon bucket.
![79be2958870ac851da1e49cdca710582.jpg](https://uploads.tapatalk-cdn.com/20210324/79be2958870ac851da1e49cdca710582.jpg)
This is wear I cut off the plastic frame for the suction cups. Sorry, don’t have the before picture.
![f2cb8e30374836a6b7c1647dd763414b.jpg](https://uploads.tapatalk-cdn.com/20210324/f2cb8e30374836a6b7c1647dd763414b.jpg)
Pump in action with silicone tubing.
![d234f0e4652ec139a71602488447d818.jpg](https://uploads.tapatalk-cdn.com/20210324/d234f0e4652ec139a71602488447d818.jpg)
![9b500037fa8f1b8abcb1b24a03d6755f.jpg](https://uploads.tapatalk-cdn.com/20210324/9b500037fa8f1b8abcb1b24a03d6755f.jpg)
Packing label insert. Sorry, didn’t think ahead and do an unboxing pick.
It also has an on/off switch so you don’t have to unplug it to turn it off. I think I paid about $25 or so.
Gerry
Sent from my iPhone using Tapatalk