Neptune Aquatics

Giveaway time!!! 50 gallon glass tank

Srt4eric

Srt4eric

Vice President
BOD
BARcard
Ok everyone. Two giveaways in the same week!!! This one is for a 50 gallon glass rimless aquarium. This tank was donated by a member way before my time and has sat in @sfsuphysics garage for a long time. The tank is brand new and is still wrapped in plastic and cardboard. The tank is 15" from front to back. 36" from side to side and 21" tall. The tank also has been drilled on the bottom. The holes look to be for a 1" bulkhead and a 3/4" bulkhead. The glass of the tank is 7/16" think. This thing is built like a tank.

For supporting members only. Simply reply below saying you want in. This will run till Friday March 3rd and I'll spin the next day.

Good luck.

20230225_113540.jpg
20230225_113459.jpg
20230225_113451.jpg
 
wodexter said:
Me too!
Click to expand...
Sorry man. But as stated above you have to be a supporting member to join and not just a guest.


How do I become a Supporting Member?

Bay Area Reefers Membership Welcome to the San Francisco Bay Area's largest reef club. What YOU get as a BAR Member: Access to the PAR Meter Access to the Inland Coral Bandsaw Periodic Discounts to Local Fish Store Sponsors. (Does not happen all the time) Entry to BAR-Member Only Events...
www.bareefers.org
 
Coral reefer said:
Not necessarily. You could plug the holes or do a closed loop
Click to expand...
For a successful closed loop, you'll need to drill holes at the other end of the tank otherwise holes in same area doesn't circulate water very well.

Yes you can plug it and you'll have a HOB. It's a good beginner tank.
 
popper said:
For a successful closed loop, you'll need to drill holes at the other end of the tank otherwise holes in same area doesn't circulate water very well.

Yes you can plug it and you'll have a HOB. It's a good beginner tank.
Click to expand...
Agree to disagree on the closed loop. Not many people do that anyways now
 
Srt4eric said:
Ok everyone. Two giveaways in the same week!!! This one is for a 50 gallon glass rimless aquarium. This tank was donated by a member way before my time and has sat in @sfsuphysics garage for a long time. The tank is brand new and is still wrapped in plastic and cardboard. The tank is 15" from front to back. 36" from side to side and 21" tall. The tank also has been drilled on the bottom. The holes look to be for a 1" bulkhead and a 3/4" bulkhead. The glass of the tank is 7/16" think. This thing is built like a tank.

For supporting members only. Simply reply below saying you want in. This will run till Friday March 3rd and I'll spin the next day.

Good luck.

View attachment 45598View attachment 45599View attachment 45600
Click to expand...
I want in please. Thank you
 
You must log in or register to reply here.
Back
Top