Well, the tank is finally setup (minus lights - I'm really dragging my feet on this as you can see).
The overflow drain on the right (fed by a 1.5" Durso-type drain) flows down to the sump via one inch flex pvc - nice and silent.
The overflow drain on the left is taking forever to settle out (same setup). The only difference between the two, is that the left drain - drains directly down into the sump via one inch pvc (as in the sump is directly under the drain).
This drain line will be okay for awhile and then starts to make the flushing/gurgling noise all over again.
So what's my fix?
The overflow drain on the right (fed by a 1.5" Durso-type drain) flows down to the sump via one inch flex pvc - nice and silent.
The overflow drain on the left is taking forever to settle out (same setup). The only difference between the two, is that the left drain - drains directly down into the sump via one inch pvc (as in the sump is directly under the drain).
This drain line will be okay for awhile and then starts to make the flushing/gurgling noise all over again.
So what's my fix?