Neptune Aquatics

Justin's Aquaforest Oceanguard 790

R

Royce023

Supporting Member
BARcard
The tank is very new. I set it up in April. I went bare bottom this time since I don't want to clean the sand.

Equipment List
  • Oceanguard 790
    • Volume
      • Display Tank - 155 US Gallons
      • System - 209 US Gallons
  • 2x ATI Straton Led (Original)
  • 2x Sicce SDC 6 (main return + UV return)
  • Spectrapure ATO
  • GHL Maxi Doser 2.2 (3 gal AWC daily)
  • GHL Doser 2.1 (ESV B-ionic 2-part)
  • GHL Propeller Breeze 3 (Fan)
  • 2x Redsea Wave 45
  • 2x Tunze 6155
  • Aqualogic (Ranco) Temp Controller
  • Inkbird controller for GHL Propeller Breeze 3
  • Ultra Reef Skimmer Typhoon UKD-200
  • Octo Aquatics Controller Board
  • Avast Plank (Auto fish feeder)
  • Lifegard 90w UV Sterilizer
Fish
  • 2x Lightning Maroon Clown fish
  • Yellow belly blue tang
  • Blue-green chromis
  • Lyretail Anthias
  • Blue-eyed Bristletooth Tang
  • Pink-streaked wrasse
A few livestock were from my old Cade tank, but a lot of them died when I was remodeling my house and relocated them into a temporary 100g Rubbermaid tub without filtration. In hindsight, I should have sold my coral before remodeling my house. My Sunset Montipora, on a rock, is growing back after suffering in the Rubbermaid tub. The CC 21 Tails Torch lost some heads. I fragged the main colony and sold a lot of peices. I recently added a Tubbs Stellata colony, TSA The Fuzz, Rainbow Loom, and TSA Fruity Pebbles from Water World Aquatics. Also added a Candy Apple Torch. Got it from a local reefer on Facebook. I'll be adding more coral later on after seeing how these new coral grow.



IMG_6445.jpeg
1751237022156.jpeg
IMG_6447.jpeg
IMG_6448.jpeg
IMG_6449.jpeg
IMG_6452.jpeg

IMG_6450.jpeg


Old CC 21 Tails Colony


10D30565-B859-4EB3-9033-D6EAD574A407_1_105_c.jpeg


Former Sunset Monti that I hope will grow back to its former state.


IMG_3573.jpeg
 

Attachments

  • IMG_3573.jpeg
    IMG_3573.jpeg
    202.7 KB · Views: 22
Last edited:
I forgot to mention that I had issues with the plumbing. The water level in the display was not stable and would cause the ATO to dump fresh water, reducing the salinity. I dealt with this problem for 2 months after finding out the salinity dropped to 1.022 - 1.023. The salinity changed so much since I was doing an AWC which was dependent on the sump water level. However, with some help from R2R, I trimmed the emergency drain stand pipe so that the water level wouldn't rise so much in the display. I don't know why they designed the emergency drain pipe to be so high.
 
Last edited:
Royce023 said:
The tank is very new. I set it up in April. I went bare bottom this time since I don't want to clean the sand.

Equipment List
  • Oceanguard 790
    • Volume
      • Display Tank - 155 US Gallons
      • System - 209 US Gallons
  • 2x ATI Straton Led (Original)
  • 2x Sicce SDC 6 (main return + UV return)
  • Spectrapure ATO
  • GHL Maxi Doser 2.2 (3 gal AWC daily)
  • GHL Doser 2.1 (ESV B-ionic 2-part)
  • GHL Propeller Breeze 3 (Fan)
  • 2x Redsea Wave 45
  • 2x Tunze 6155
  • Aqualogic (Ranco) Temp Controller
  • Inkbird controller for GHL Propeller Breeze 3
  • Ultra Reef Skimmer Typhoon UKD-200
  • Octo Aquatics Controller Board
  • Avast Plank (Auto fish feeder)
  • Lifegard 90w UV Sterilizer
Fish
  • 2x Lightning Maroon Clown fish
  • Yellow belly blue tang
  • Blue-green chromis
  • Lyretail Anthias
  • Blue-eyed Bristletooth Tang
  • Pink-streaked wrasse
A few livestock were from my old Cade tank, but a lot of them died when I was remodeling my house and relocated them into a temporary 100g Rubbermaid tub without filtration. In hindsight, I should have sold my coral before remodeling my house. My Sunset Montipora, on a rock, is growing back after suffering in the Rubbermaid tub. The CC 21 Tails Torch lost some heads. I fragged the main colony and sold a lot of peices. I recently added a Tubbs Stellata colony, TSA The Fuzz, Rainbow Loom, and TSA Fruity Pebbles from Water World Aquatics. Also added a Candy Apple Torch. Got it from a local reefer on Facebook. I'll be adding more coral later on after seeing how these new coral grow.



View attachment 70757View attachment 70758View attachment 70759View attachment 70760View attachment 70761View attachment 70762
View attachment 70763

Old CC 21 Tails Colony


View attachment 70764

Former Sunset Monti that I hope will grow back to its former state.


View attachment 70766
Click to expand...

How do you like the the controller board? I have most of Matt’s stuff and was looking at that the other day. Great setup overall.
 
Alexander1312 said:
How do you like the the controller board? I have most of Matt’s stuff and was looking at that the other day. Great setup overall.
Click to expand...
Thanks. It is high quality. The hinges are strong unlike other brands. However, I got a lot of cables and power bricks stuffed inside, so it was a little hard closing the door. For some reason, it didn't come with mounting screws, but I used my own screws and drywall anchors anyways. I requested for a free large external platform just in case I needed it in the future. It can be used for a doser or automatic tester, for example.
 
Royce023 said:
Made a hole in the wall for the AWC and to refill the ATO container. On the other side is an outdoor sink.
Click to expand...
Your build looks Cool the control pannel is inspring as well. What type of face plate cover is this?

If you know some general name or term for it so I could ask or search for one like it. Thanks.

I could see a use for one or two to go through a wall neatly to run dosing lines from my controller on main tank to my frag system. I would need any holes to be very neat and not a crazy eyesore. What you did here looks legit.
 
MichaelB said:
Your build looks Cool the control pannel is inspring as well. What type of face plate cover is this?

If you know some general name or term for it so I could ask or search for one like it. Thanks.

I could see a use for one or two to go through a wall neatly to run dosing lines from my controller on main tank to my frag system. I would need any holes to be very neat and not a crazy eyesore. What you did here looks legit.
Click to expand...
I used this one:

Amazon.com: DATA COMM Electronics 45-0017-WH Split Style TV Outlet Covers Wall Plate w/ Flexible AV/HDMI Cable Pass-Through- Sturdy Wall Plate Cover For Electrical Outlets, Electrical 1-Gang, Standard Size, White : Electronics

Amazon.com: DATA COMM Electronics 45-0017-WH Split Style TV Outlet Covers Wall Plate w/ Flexible AV/HDMI Cable Pass-Through- Sturdy Wall Plate Cover For Electrical Outlets, Electrical 1-Gang, Standard Size, White : Electronics
www.amazon.com
 
ALK steady at 7.5-8.

Tested Phos and Nitrate for the first time (7/12/25):

Phosphate = 0.334 ppm or 109 ppb Phosphorus (Hanna Phosphorus checker). Repeated test and it was about the same. Replaced the battery and brought new reagent to ensure it was accurate.
Nitrate = 0

Kind of surprised that the phos is so high. Any tips of lowering phos? Currently, my tank looks okay. Thinking of reducing feeding and running the skimmer more wet. I have AF phosphate minus that came with the tank. Maybe I’ll use that..
 
Last edited:
If everything looks fine just let the phosphate ride. The zero nitrate is something I'm running into right now and even with feeding 7x daily I'm still at like 0.5.

Wondering if anyone else here is feeding ammonia or nitrate?
 
Darkxerox said:
If everything looks fine just let the phosphate ride. The zero nitrate is something I'm running into right now and even with feeding 7x daily I'm still at like 0.5.

Wondering if anyone else here is feeding ammonia or nitrate?
Click to expand...
Yes, maybe i'll see how the coral grow with the high phos. If I see any negative effects, i'll try lowering phos. So far corals are doing fine.

Torch polyps more extended when increasing my Gyres to 100%.
0F8D39D8-6B1F-4DED-A0FC-45E83B71FF36_1_102_o.jpeg


Montipora growing back on the rock.

Tubbs Stellata doing fine. Some tips got broken off into frags while moving the coral around and are now almost healed after 2 weeks.
5069C8DA-AEE1-4CCF-BDA1-61B5046DFE7E_1_102_o.jpeg


Tank view from my kitchen window:

IMG_6504.jpeg
 

Attachments

  • 1752355855188.jpeg
    1752355855188.jpeg
    100.8 KB · Views: 15
  • IMG_6504.jpeg
    IMG_6504.jpeg
    89.9 KB · Views: 16
Tank looks great. Wow, the CC21 colony is amazing!

Darkxerox said:
If everything looks fine just let the phosphate ride. The zero nitrate is something I'm running into right now and even with feeding 7x daily I'm still at like 0.5.

Wondering if anyone else here is feeding ammonia or nitrate?
Click to expand...
Quoting from reading/listening/watching @Thales, Dong, ..., ammonia "juice is not worth to squeeze". There is no real scientific study, evidence, stats to back it up. Nitrate is safer bet.
 
You must log in or register to reply here.
Back
Top