Neptune Aquatics

Lawrence's first (90g) salt water tank

So here is a question-we added the salt-approximately 17 lbs. The PH is currently 8.2 but the S.G. Is coming in a little low at about 1.015. So I need to add a little more salt but don't want to overshoot the PH.
How potent is the salt to PH?
Do I start by adding 1/2 pound or 1 pound at a time to get to there?
90 gal tank with 100 lb of rock and prob 30 lbs sand in terms of water displacement. TIA.


Sent from my iPhone using Tapatalk
 
Gablami said:
I wouldn't worry about the pH at this point. Just get salinity where you want it. PH is variable to environmental air, lighting cycle, skimmer, alk etc. you can worry about that later.


Sent from my iPhone using Tapatalk
Click to expand...
Thanks. Good to know.


Sent from my iPhone using Tapatalk
 
jestersix said:
Yay!! Glad to see this getting wet...had a great time on this build and looking forward to watching it start to grow...
Click to expand...

I cleaned the glass a bit to show off your work! We can't wait to get some corals on there and get a few fish. Nephews are visiting this weekend -- hoping they think it is a fun idea to "Reef" with us.

Our latest:

The overflow is noisy and we'll have to sort that out as we go forward. But bit by bit, we are making it work.

And now the temp probe is acting up and telling us the water temp is 85+ (it isn't). Fun times.

Next up: glass tops and lighting! And a fish!


Sent from my iPhone using Tapatalk
 
Glad to know tank is running!
A side note. When I had the 90 at home, initially I had a Mag 9; overflow was noisy as the drain tried to keep up with the pump's flow. I switched it for a Mag 7 and that did the job.
 
xcaret said:
Glad to know tank is running!
A side note. When I had the 90 at home, initially I had a Mag 9; overflow was noisy as the drain tried to keep up with the pump's flow. I switched it for a Mag 7 and that did the job.
Click to expand...

Hmmmm. We have a 8.5 I think, but I just grabbed a 250gph to help when empty the tank that we figured we could use for water changes. Thinking that wouldn't be powerful enough ongoing, but I might see if that helps while we are cycling and and tinkering and keeps the noise down. @CoralReefer also suggested T'ing off the return pump to cut the flow into the tank.


Sent from my iPhone using Tapatalk
 
L/B Block said:
Hmmmm. We have a 8.5 I think, but I just grabbed a 250gph to help when empty the tank that we figured we could use for water changes. Thinking that wouldn't be powerful enough ongoing, but I might see if that helps while we are cycling and and tinkering and keeps the noise down. @CoralReefer also suggested T'ing off the return pump to cut the flow into the tank.


Sent from my iPhone using Tapatalk
Click to expand...

Correction - it is a 9.5.

So is dropping from 950gph to 250gph while we are cycling a bad idea? Or just briefly to see if cutting the flow cuts the noise enough? Based on what we are learning, we want a lot of movement right now to get things mixed - but we can always fire up a Jaebo.




Sent from my iPhone using Tapatalk
 
L/B Block said:
Correction - it is a 9.5.

So is dropping from 950gph to 250gph while we are cycling a bad idea? Or just briefly to see if cutting the flow cuts the noise enough? Based on what we are learning, we want a lot of movement right now to get things mixed - but we can always fire up a Jaebo.




Sent from my iPhone using Tapatalk
Click to expand...

Don't think it would hurt your cycle at all to mess around with the return pump for a couple hours. Bacteria does need oxygen though, so eventually you'll need gas exchange and surface agitation.
 
Coral reefer said:
If the smaller pump fits onto existing plumbing easily go for it. Will want a power head running for sure tho
Click to expand...

Thanks! I think we'll consider stepping down the pump regardless - it was pushing around the substrate, too. Lawrence can do the flow calcs.


Sent from my iPhone using Tapatalk
 
This is a safe sealant to use for future reference.

031.jpg
 
We'll be real reefers one day...
71afa5589df2d4111bf19fff6877de89.jpg


Salinity at 1.015 SG and 21-22 PPT so we need to salt it up.

We have the new versa top, and have almost made a lighting decision.


Sent from my iPhone using Tapatalk
 
Better one day than never!

If your ammonia has not been at least 2.0 ppm during your cycle, I'd recommend doing so to make sure your cycle gets kick started on the right note. Gotta make sure there's enough to feed the bacteria to multiply to a nice reef sustaining population of nitrifying bacteria.
 
L/B Block said:
Good to know. You mean we don't need to put a "damsel" in distress by rising ammonia levels?


Sent from my iPhone using Tapatalk
Click to expand...

Right, you can do a fishless cycle. Add ammonium chloride until you get to 2.0 ppm and add some of the bottled bacteria to help speed up the process.

DrTim's Aquatics One & Only Live Nitrifying Bacteria for Cycling Aquaria, Salt Water, 8-Ounce https://www.amazon.com/dp/B002DVRHMS/ref=cm_sw_r_cp_api_bpLFybHD70F8P

I wouldn't get it on Amazon though. I got the same size bottle from @robert4025 at Neptune for 1/2 the price.
 
You must log in or register to reply here.
Back
Top