Metric size pvc pipes and fittings

[Edgar Sandoval]

Do you guys know if any local hardware stores or fish stores carry metros size pvc parts? I need 32mm elbows and 40mm elbows.


Sent from my iPhone using Tapatalk

 

[California_Reef_Co]

I ran in the same problem, I couldn't find metric pvc anywhere. If your in a rush you can use a piece of tubing to adapt from metric to standard. If not your best bet is to order it.

 

[Flagg37]

Yeah, metric plumbing is hard to find.

 

[scuzy]

Best to get the metric converted fittings from brs.


Sent from my iPhone using Tapatalk

 

[scuzy]

Or dremel the size down. Since it's not pressure fittings you can sand it down a bit.


Sent from my iPhone using Tapatalk

 

[Flagg37]

The 32mm (1.2598") is super close to 1-1/4". 40mm (1.5748") is a bit further off from 1-1/2".

 

[xcaret]

Do you guys know if any local hardware stores or fish stores carry metros size pvc parts? I need 32mm elbows and 40mm elbows.


Sent from my iPhone using Tapatalk

I believe Ryan Herco in SJ? has metric; I'm on the same boat but in no rush to fix a Korallin reactor

 

[Julius Chen]

I use teflon tape to bridge the slight gap