PIF: Vectra L1

[Meshmez]

Vectra L1 that was passed to me from @Srt4eric.

It does have some magnet housing swelling

Pickup San jose

 

[Turkeysammich]

Sent dm

 

[RandyC]

Contact ecotech support on the off chance they replace that L1 because that warping is caused by a thermal heat issue that they admitted was a design problem. I had one replaced after owning it for 4 years. Plus, you probably don’t want to run that pump anymore. That warping and the bumps will grind the impeller and cause bits of metal to rub/scrape off.

 

[IOnceWasLegend]

Contact ecotech support on the off chance they replace that L1 because that warping is caused by a thermal heat issue that they admitted was a design problem. I had one replaced after owning it for 4 years. Plus, you probably don’t want to run that pump anymore. That warping and the bumps will grind the impeller and cause bits of metal to rub/scrape off.

Seconding this either for @Meshmez or whoever claims it. Ecotech support has been beyond great the last couple times I've had to use them (charged me $200 for a brand new G6 XR30 to replace the G5-to-G6 conversion that fell in my tank the first time, then charged me $80 to repair a noisy dryside on an MP40 and sent me a brand new NIB current-gen MP40), so it would be well worth reaching out to them.

 

[Srt4eric]

I'll take it!!!

 

[Meshmez]

Picked up by @phc567