Reefkeeper 2 Channel Won't Shut Off

[hiepatitis]

I plugged an auto-top off on channel 1 and noticed the timer did not shut it off. Even when manually overriding it stays on.

 

[sfboarders]

Not sure about this but the ATO needs to be plugged into a mechanical relay outlet. If not, it will stay on because of it's low amp drive. Don't quote me on that though. :bigsmile:

 

[hiepatitis]

Channel 1 has a mechanical relay. I plugged a higher powered device in the channel and still

 

[BigMac]

relay may be stuck.
Power down the strip completly/ disconnect from control. If you have a meter with it completely removed check for contunuity.
If you dont have a meter reconnect and test again.
If you have continuity I would call Reefkeeper and get a new strip.