Welcome to BAR - the Bay Area's premier saltwater hobbyists hub!

Torch Coral question

Secretary
BOD
Joined
Dec 7, 2022
Messages
1,442
Anyone use a frag system like this or have a recommendation?

View attachment 71635

Your fish won’t have anywhere to hide, and you may end up feeling like it’s too sterile. Not really a display any more at that point.

However, If your enjoyment comes from seeing the coral grow, and you don’t care as much about the display aspect, you could make it work. Be careful not to loose too much bio media and throw off your tank’s balance.
 
Supporting Member
Joined
Aug 12, 2014
Messages
312
I have a few torches up high in around 400+. .Right now they are sitting about 4-6" below the surface fully open.

They grow more dense than torches I have in 250 but are still branching and have great color. I wanted to see how they do in high par and growth pattern is the only difference.
 
Sponsorship
BOD
Joined
Feb 5, 2018
Messages
1,306
I run a frag system like this. It is a AIO and only for frags and temporary fish and coral colony holding.
Can you send a pic of your frag system.

Im still deciding on a new aquascape or possibly a frag system.
 
Supporting Member
Joined
Apr 4, 2023
Messages
1,806
Anyone use a frag system like this or have a recommendation?

View attachment 71635
My frag tank is basically like this. I’ll attach a pic of lights barely turning on so you can see the racks since they’re not really visible once polyps are extended looking top down

I use five DIY 10x10 racks and then leave space on the floor for other stuff
 

Attachments

  • IMG_7910.png
    IMG_7910.png
    340.7 KB · Views: 124
Facilities/Events
BOD
Joined
Aug 19, 2023
Messages
4,576
20250629_184705.jpg
20250629_184720.jpg


50 gallon low boy

Hammers are on diy racks torches on things in picture i shared earlier. Half the tank is covered with 3-5 inch square frag tiles.

I kinda run it as a lagoon style frag tank combination.
 
Sponsorship
BOD
Joined
Feb 5, 2018
Messages
1,306
It looks like if I wanted a natural scape for the torches, it would need to be low-profile with a maximum height of 2-3 inches for most parts.
 
Facilities/Events
BOD
Joined
Aug 19, 2023
Messages
4,576
It looks like if I wanted a natural scape for the torches, it would need to be low-profile with a maximum height of 2-3 inches for most parts.
Look up examples of lagoon style reefs. There are some that are amazing. Not implying mine is lol.

You may find interesting ideas.
 
Sponsorship
BOD
Joined
Feb 5, 2018
Messages
1,306
Maybe this could be an idea, they seem to be low enough to the ground if I lay them flat.
1753473007176.png
 
Supporting Member
Joined
Oct 19, 2023
Messages
479
I'm not sure, probably about the same amount, I would guess. What type of branches are those? But that's the look I would probably go for. Thanks for sharing.
I have two in this picture and one is Buried in the sand. I am not sure the exact name but I was told they were like 10 Years old. Some one from this club bought them from a Closing LFS long time ago. This is the closest that looks like the ones I have.
https://fishtanksdirect.com/real-re...eiOY2F1wFEYszpmBaTGqgYeyh7oE2xXqqe3FfUIwCeCTg
 
Supporting Member
Joined
Oct 19, 2023
Messages
479
I think this would be easier to lay flat.

 
Supporting Member
Joined
Feb 22, 2025
Messages
14
This topic went a different direction, but I saw a picture recently where a 50+ head (wild) torch colony was completely out of water at low tide, meaning they can adapt to being entirely out of water, skeleton and all, on a consistent basis for a few hours at a time. Would be an interesting experiment but my guess is the torches will adapt to its setting and table out if growing taller no longer makes sense.
 
Top