Reef nutrition

What do you use to clean your sumps (and pipes)?

Alexander1312

Alexander1312

Supporting Member
BARcard
Curious which tools you use to clean your sumps?

And since we are on this topic, how do you clean the pipes?

My sump is 57 gallon and I have not cleaned it since the inception of the tank a year ago, and I would like to do this now. But I do not know how to get started, vaccuming the sump seems more difficult since I cannot use what I use for the DT, and I think I should probably start cleaning the pipes too.
 
I bought the fluval provac to give it a try - meh, at best. It will pick up the things that easily float.
I also bought a maxi jet 900 to combine with a VCA vacuum attachment -- slightly better but awkward with the equipment in my sump
I also got a long handled scraper -- razor and plastic attachment to get stuff off of the walls in the sumps -- that worked great

In the end, I vacuumed up some stuff with the fluval after scraping -- it did get a lot of gunk off of the surfaces and main sections of the sump. I then just left the maxi jet in a far chamber of the sump to improve circulation and keep gunk in suspension to come back through the sump to get filtered out -- sump is cleaner and display visibility is better (less random occurrences of stuff being kicked up) -- or it might just be the 57W UV being operational for the past 3 weeks. Did both projects at the same time.

Just my 2 cents
 
I use a siphon tube just like I would from the display.
Level in an empty bucket is lower than the level in the sump.
Don’t clean plumbing cause I’m lazy. My display that was up for like 7 years had some stuff in it but was just fine. If you have small gauge like 3/4” maybe needs more attention or replacement every 5 years or so
 
I’ve tried all of the above and never really been satisfied. Which is why I don’t clean it very often.

Shop vac goes too fast. Doesn’t give critters I want time to move away. And fills up super fast, a few seconds.

Regular passive siphon tube doesn’t have much suction since the difference in water level isn’t much and decreases quickly. I’m thinking of doing it with the outflow water going through filter socks, and a small pump returning the water to the sump so I can keep going.

I’ve tried a couple different versions of suction bulbs and the 1-way valves required for them to work just clog open too quickly when you’re siphoning crap. So you have to stop and clean it frequently.

Similarly I’ve tried small pumps like maxi jet to suck out but the impeller fouls quickly so you have to stop and clean it multiple times.
 
during water change, suck water and gunk from the sump instead of dt and drain to my backyard.
 
Last edited:
As far as pipes- I wasn’t planning on cleaning them but a couple years ago I had to because they were growing too much tube worms and other stuff and starting to siphon less/unreliably. Especially the emergency pipe wasn’t working well, which can lead to a very unpleasant surprise.

I siphoned out a bunch of gallons, emptied the entire overflow into the sump. Took out the plumbing and disassembled what I could (not too hard with Red Sea). Then cleaned each segment with vinegar/citric acid and scrubbing, plus stiff pipe brush on a long flexible metal line I have for the inside. It’s kind of a project and has to be done within a few hours since it stops your return/tank heating/etc.

At the same time I cleaned out the overflow chamber, which was similarly overgrown. Just manual chipping/scrubbing.

I’m due to do it again soon.
 
I take a tiny sicce nano pump and attach a hose to it. Then use a temp reef sock (aka reef diaper) with a couple of clamps -so the detritus dumps into that.. I should do it more often but I don’t..
 
I’ve tried a few liquid transfer battery pumps but they just don’t last especially vacuuming up depri! Other small aquarium pumps also clogged easily jamming the impeller..

So when I do which is not very often I use this with the hose extension kit plus the detail kit which slows down the water intake if needed for more time.. If need to recycle water back into tank/filter socks just add a spigot to the bucket and elevate tossing drain hose back in socks or ziptie a sock to hose then toss in sump or tank..Install the spigot a few inches above the bottom to help prevent larger depri from clogging also can screw hose barb on spigot …Pics are basically what I use since it packed up in the garage atm. These bucket vacs are loud and need to be rinsed with fresh water after use. But I do utilize small pumps/ power head in the sump to prevent most of the buildup..
No maintenance schedule on plumbing haven’t noticed any water flow slow downs yet
 

Attachments

  • IMG_7792.jpeg
    IMG_7792.jpeg
    76.7 KB · Views: 17
  • IMG_7794.jpeg
    IMG_7794.jpeg
    42.6 KB · Views: 17
  • IMG_7795.jpeg
    IMG_7795.jpeg
    49.3 KB · Views: 14
  • IMG_7810.jpeg
    IMG_7810.jpeg
    46.5 KB · Views: 16
  • IMG_7803.jpeg
    IMG_7803.jpeg
    149.5 KB · Views: 16
PjFish said:
I’ve tried a few liquid transfer battery pumps but they just don’t last especially vacuuming up depri! Other small aquarium pumps also clogged easily jamming the impeller..

So when I do which is not very often I use this with the hose extension kit plus the detail kit which slows down the water intake if needed for more time.. If need to recycle water back into tank/filter socks just add a spigot to the bucket and elevate tossing drain hose back in socks or ziptie a sock to hose then toss in sump or tank..Install the spigot a few inches above the bottom to help prevent larger depri from clogging also can screw hose barb on spigot …Pics are basically what I use since it packed up in the garage atm. These bucket vacs are loud and need to be rinsed with fresh water after use. But I do utilize small pumps/ power head in the sump to prevent most of the buildup..
No maintenance schedule on plumbing haven’t noticed any water flow slow downs yet
Click to expand...
I hadn’t thought of the outflow spigot from the bucket back to the tank- still have to alternate between filling and draining since you need it closed for the shop vac to work, but probably a lot easier. Using the attachments to slow it down makes sense but it’s still too powerful of a suction for this use (to me).
 
I would not plan to return any water you shopvac out unless your shopvac is brand new. You don’t know what junk has collected inside the tube even if you’ve done a good job cleaning the collector.

It works great though- very fast and powerful. I would never use it in the DT though, but it’ll suck out the entire contents of your sump in less than 30 seconds.
 
You must log in or register to reply here.
Back
Top