High Tide Aquatics

Will's 50 gallon budget build.

Hi all,

I'm relatively new member and have already learn a lot from BAR. I was introduced to BAR by someone who used to be or maybe still is a member, but is taking a break from the hobby. I bought a used sump tank from him and he also helped modify the used 50 gal. plexiglass tank that my young adult kids bought for me. I believe Matt is his name. The tank had pre drilled holes for intake and return. He increased the intake from 1/2" to 1" hole then glued a skimmer box.

I've mainly maintained fresh water tanks in my young adult life. Mostly Cichlids along with some of the rare and beautiful catfish from these lakes. I got to a point where I was breeding Brichardi and selling them to fund my hobby. I kind of slowed down as the kids grew older. I've been in the Tech. industry for ~26 yrs. Have been commuting from Hollister to San Jose for approx. 24 yrs. May 2020 I was diagnosed with a serious medical condition. Since then I've been on permanent disability. After busy for so many years it was hard getting used to being at home all day especially with covid. Wifey was thrilled for me to be home. I was too until she had to do the many household duties. I was got bored fast.

So Christmas 2020 my young adult children bought me a used 50 gal. plexiglass aquarium. I figured, cool now I have for all the time to pay attention to the live stock I buy. I've always mentioned to my family that I have never started a salt water tank nor had the time for it. Not to mention the $$$ for this kind of set up. From Dec. to early Feb. 20201 I've been looking online and asking LFS about what's needed to get started. So many different opinions and options. If I could, I should have waited a bit longer and spend more on better lighting. Oh well.

My setup. Not as elaborate as some of the setups I've seen or heard about, but so far it's works.

1616609687235.png


Will add cycle info later
 

Attachments

  • TankMod1.jpg
    TankMod1.jpg
    80.9 KB · Views: 230
  • TankMod2.jpg
    TankMod2.jpg
    63.3 KB · Views: 230
  • TankMod3.jpg
    TankMod3.jpg
    81 KB · Views: 242
  • Setup1.jpg
    Setup1.jpg
    58.1 KB · Views: 228
  • Setup2.jpg
    Setup2.jpg
    117.4 KB · Views: 235
  • Setup3.jpg
    Setup3.jpg
    82.9 KB · Views: 235
  • Setup4.jpg
    Setup4.jpg
    119.2 KB · Views: 224
  • FinalSetup.jpg
    FinalSetup.jpg
    154.2 KB · Views: 244
Last edited:
Cycle start date 02/22/2021 - 03/05/2021

1616994225927.png


I had add more salt to increase the Salinity and alkalinity after having a LFS test my water. I also found out that I hadn't calibrated the Hanna salinity tester properly. Retested.

1616994533744.png
 
Adding occupants after cycle period from 3/18/21 - 4/1/21.

1. CUC - 6 Asterea snails, 10 Nassarius snails, 2 Mexican Turbo snails, 4 Trochus snails
2. Invertebrates - 2 Cleaner shrimp and 2 Peppermint shrimp. Flame shrimp DOA.
3. Softies and one LPS - 3 frag with mixed Zoas (Bam Bam/something?, Eagle Eye/ Radio Active Eagle Eye), 1 Toxic Times Favia?, Green tip toadstool, and an Alveopora
4. Fish - 1 Court Jester Goby and 1 Yellow Watchman Goby
 

Attachments

  • Alveopora.jpg
    Alveopora.jpg
    90.7 KB · Views: 192
  • Bambam and something.jpg
    Bambam and something.jpg
    72.8 KB · Views: 195
  • Favia.jpg
    Favia.jpg
    69.7 KB · Views: 186
  • LiveStock4.jpg
    LiveStock4.jpg
    107.6 KB · Views: 200
  • Taodstool2.jpg
    Taodstool2.jpg
    95.1 KB · Views: 186
  • Toadstool1.jpg
    Toadstool1.jpg
    65.5 KB · Views: 185
  • 20210326_142310.jpg
    20210326_142310.jpg
    91 KB · Views: 182
Hi all,

I'm relatively new member and have already learn a lot from BAR. I was introduced to BAR by someone who used to be or maybe still is a member, but is taking a break from the hobby. I bought a used sump tank from him and he also helped modify the used 50 gal. plexiglass tank that my young adult kids bought for me. I believe Matt is his name. The tank had pre drilled holes for intake and return. He increased the intake from 1/2" to 1" hole then glued a skimmer box.

I've mainly maintained fresh water tanks in my young adult life. Mostly Cichlids along with some of the rare and beautiful catfish from these lakes. I got to a point where I was breeding Brichardi and selling them to fund my hobby. I kind of slowed down as the kids grew older. I've been in the Tech. industry for ~26 yrs. Have been commuting from Hollister to San Jose for approx. 24 yrs. May 2020 I was diagnosed with a serious medical condition. Since then I've been on permanent disability. After busy for so many years it was hard getting used to being at home all day especially with covid. Wifey was thrilled for me to be home. I was too until she had to do the many household duties. I was got bored fast.

So Christmas 2020 my young adult children bought me a used 50 gal. plexiglass aquarium. I figured, cool now I have for all the time to pay attention to the live stock I buy. I've always mentioned to my family that I have never started a salt water tank nor had the time for it. Not to mention the $$$ for this kind of set up. From Dec. to early Feb. 20201 I've been looking online and asking LFS about what's needed to get started. So many different opinions and options. If I could, I should have waited a bit longer and spend more on better lighting. Oh well.

My setup. Not as elaborate as some of the setups I've seen or heard about, but so far it's works.

View attachment 25159

Will add cycle info later
I forgot to thank @Srt4eric for the dry rocks.
 
Tank update.

New additions:
1. 1 Extreme Picasso and 1 Extreme snowflake clownfish.
2. 1 Green Mandarin Goby
3. 2 mushroom
4. 2 misc. SPS corals and several zoa frags
 

Attachments

  • Red Devil Discosoma1.jpg
    Red Devil Discosoma1.jpg
    86.4 KB · Views: 185
  • Rhodactis mushroom (orange and green color).jpg
    Rhodactis mushroom (orange and green color).jpg
    83.7 KB · Views: 170
  • SPS1.jpg
    SPS1.jpg
    76.6 KB · Views: 183
  • SPS2.jpg
    SPS2.jpg
    61.4 KB · Views: 180
Sorry to be a barer of bad news but I'm afraid your tank is too young at this point for a mandarin, esp in light of you also having a jester goby which also will eat pods.

To ensure success of your manadarin, I suggest that you build a pod hotel... load it twice in the first month, and maybe an additional reload once the month following... monitor to see how plump or not the mandarin will be and reload pods as need (but only at night... and with a funnel straight into the pod hotel).

Here's a cheap DIY pod hotel I decribed that I've used to keep a mandarin in a 13.5G tank. It should work fine for your 50G as well.
 
Sorry to be a barer of bad news but I'm afraid your tank is too young at this point for a mandarin, esp in light of you also having a jester goby which also will eat pods.

To ensure success of your manadarin, I suggest that you build a pod hotel... load it twice in the first month, and maybe an additional reload once the month following... monitor to see how plump or not the mandarin will be and reload pods as need (but only at night... and with a funnel straight into the pod hotel).

Here's a cheap DIY pod hotel I decribed that I've used to keep a mandarin in a 13.5G tank. It should work fine for your 50G as well.
That's the only reason I bought the Mandarin. I have a bunch of copepods in my tank. Thanks for the info on the DIY hotel. Mando can start swingin again.
 
You will be amazed how fast that mandarin will take down your pod population. Before I got my mandarin I could barely see through the glass of my biocube. Now I supplement every two weeks.
 
Tank Update.

Added Mushrooms:
Orange Yuma and Red discoma with blue dots (Superman?) on one frag
Golden Gonzo
2 Gonzo
Neon Rhodactis
Green/Yellow Yuma
 

Attachments

  • NeonMushrooms.jpg
    NeonMushrooms.jpg
    75.2 KB · Views: 166
  • orangeYumaand Red Discoma.jpg
    orangeYumaand Red Discoma.jpg
    76.2 KB · Views: 168
  • NewMushrooms.jpg
    NewMushrooms.jpg
    85.7 KB · Views: 164
Journal update.

I replaced my Current Orbit lighting with 2 used AI Prime HD lights. The corals look much better. Took some time to adjust to a setting the corals accept.
 

Attachments

  • 20210715_085703.jpg
    20210715_085703.jpg
    162.9 KB · Views: 155
If you still have the Current orbit strip only, I would recommend getting a Reef Brite Pro actinic strip to get better color pop. Your corals will look as nice as display tanks in local reef shops.
 
If you still have the Current orbit strip only, I would recommend getting a Reef Brite Pro actinic strip to get better color pop. Your corals will look as nice as display tanks in local reef shops.
I actually bought 2 used AI Prime HD's and that made a difference. Now I just need to understand how to set the lights as well as my phone camera setting to take better pics.
Thanks for your suggestion. I may look into that.
 
Back
Top