Jestersix

aqua-nut's 120 - getting back to salt!

It's been a while. Time for updates!

I set it up in the living room. Decided I didn't like the plumbing so redid it. It's been running for a week with fresh water and all looks good. Today my wife and I - well really just my wife - made the aquascape. The following is a mockup of the tank footprint and the stacks of rock we like. What do you think?



Attached files /attachments/sites/default/files/DSC00313.jpg /attachments/sites/default/files/DSC00314.jpg
 
Coral reefer said:
Hard to tell, but make sure there are some open spaces in the rocks for fish to hide
Click to expand...

Thanks for the heads up. There are LOTS of cave/open spaces. Impossible to tell from the crappy pics! :)

And thanks to Kris and Denzil for the comments.
 
I finally took the protective paper off the acrylic. Also put the rock in. i thought it would be easy moving from the mockup in the garage to the tank. Took a lot longer than I thought but it's done. Sand today and my first 40G of SW!

It's really hard to take a pic when there is no real light on the tank. So many reflections!!
And a pic...



Attached files /attachments/sites/default/files/rockwork in tank.jpg
 
That tank is SWEET! I like the dimensions a lot. Very clean finish too. Rockwork fits that tank nicely! Good job and congrats John.
 
I think I might try to hire your wife for her aquascaping abilities for my 210 once it's all set up and ready to go!! LoL ;D

It looks great! I can't wait until you get some life in there! :D
 
Thanks Kris and Brandie!

To be fair, the design was my concept! I put a sheet of paper on the plywood, drew two triangles and said, "Let's build it like this". So to put numbers to it, concept (me) 1%, implementation (wife) 99%. :)

There is a thread on RC about aquascape design. The best posts are (IMHO) a series of shots starting with the rock and progressing thru the years. After a while you can't see the rock anymore! The principles I took from that, don't put too much rock in, leave lots of room around the edges, don't be shy about pruning!! Now if only I could practice that in my fresh water tank. Somehow it turns to a jungle in no time.

I think the right mountain might be too tall. Nothing is attached so as things grow I can either prune corals or remove the upper rocks.
 
Following along. Awesome job. It's the exact same setup I have. I did have better luck tuning the flow with a gate valve instead of a ball valve but looks like yours is working fine. I have an ATB 840v2 skimmer and it's great and very, very quite. When there is no water sound like your tank, the pumps sound becomes much more noticeable. I also have an ATB FLowStar 1800 return which is very quiet as well.
 
Yes Denzil, you do need to get to the stand! (says the king of procrastination!) :)

A pic with the lights installed! Fish and corals soon - really. ;)

One of these days I'll figure out the image posting tricks. This is a 'Cinemascope' kind of image. :( Not for viewing on a phone!!

newlights.jpg
 
aqua-nut said:
Yes Denzil, you do need to get to the stand! (says the king of procrastination!) :)

A pic with the lights installed! Fish and corals soon - really. ;)

One of these days I'll figure out the image posting tricks. This is a 'Cinemascope' kind of image. :( Not for viewing on a phone!!

newlights.jpg
Click to expand...

It's not your fault... the site doesn't handle auto-resizing well... it's just free-form basically, LoL.
 
Looks AWESOME John! What kind of lighting did you end up with? I couldn't find that in the rest of the thread. I like the overall color a lot. Scape looks GREAT!
 
You must log in or register to reply here.
Back
Top