Some thoughts (opinions from a big tank owner):
[snip]
The tank is not even close to the main expense. If $1,000 is a big deal, don't get a bit tank. Period.
You might want to make a spreadsheet estimate on electricity and maintenance costs.
Don't rush the decision. The idea is that this will be a long term hobby. So why hurry.
Don't make decisions on tank-of-the-month pictures.
Sure, good starting points and something to strive for.
But those are more the "exception" than the norm.
So decisions based on those could be wrong.
There is no true requirement for a fish room, or a giant sump. But it helps a lot.
In particular, it helped me a lot in the early years, because I was often
making giant spills and flooding the garage.
Thanks for all the feedback, I enjoy this conversation and appreciate being able to bounce ideas off y'all's.
Just to clarify, this isn't my first rodeo. I've had a 135g FW co2 planted tank in the distant past; granted it's not the same maintenance as a reef, but keeping a large tank is not completely a foreign concept. However, doubling the volume is somewhat intimidating after considering all the information.
I agree, the cost of the tank is just the starting point. The $1,000 price differential was meant as shorthand for the increases in cost overall for larger everything such as equipment, etc. Just look at the price jump from an MP40 to MP60.
I'm uncomfortable with the concept that since reefing is an expensive hobby, we should accept the idea of writing a blank check for all expenditures. As in any hobby, there are different price tiers and entry points, that's why some people drive Hyundais while others have Bentleys, but to simply dismiss a person's attempts to stay within budget as unrealistic is a disservice to our community. For one thing, it limits constructive discourse and discourages the participation of new members. Secondly, it creates a market bereft of sensible price controls. If consumers don't balk at extortionistic prices, producers have no reason to cap them. Thirdly, if we never question the status quo, how do we know there isn't a better alternative?
At the risk of sounding contradictory, there is also some truth to the old adage, "you get what you pay for." That's why I would buy a new tank versus used for anything larger than 60 gallons. My risk aversion is proportionally inverse to the possibility of # gallons of water on the floor. However, I also understand that the progression from manual dosing, to dosing pumps, to calcium reactors is directly tied to the cost of convenience and efficacy. I would argue that if CaRx's were an absolute necessity, there would be far fewer people keeping SPS tanks. I'm still navigating which areas I can cut costs, and which require full investment.
At this point I have more time than money, which might change in the future; but as an example, I can always upgrade from dosing pumps to a CaRx when the time comes. Mind you, I haven't ruled out a CaRx yet if a good used one comes up (
@gimmito). I'm also seeking a used chiller, return pump, skimmer and two MP60's
. However, I think I would probably need new heaters, Apex controller, and possibly sump depending on my stand's access points. I already have the lights, co2 tank/solenoid, and fishes... plus three large Rubbermaid tubs of aquarium paraphanelia
.
Regarding TOTM's, that was a good reminder
@rygh, but I wholeheartedly agree with two details Joseph Peck discusses. The first is the concept of KISS (Keep It Simple Stupid), because that has also been my reefing philosophy. Discounting operator error -- the less moving parts, the less possible points for equipment failure. That's why I refer to this as my stripped down tank build and keeping it to the bare necessities. Secondly, it's true that almost all tank permutations have been explored, don't reinvent the wheel, just find a setup you like and copy it as closely as possible. I REALLY LIKE Peck's tank, but don't have room yet for a 300g sump and my tank's dimensions have already deviated from his original plan.
@sfsuphysics I'm in no rush, the new media is presently being cycled with established live rock & sand in the FOWLR. The new stand (72x24x35) will be installed next month. I decided to order two base cabinets from my old kitchen manufacturer and altering it to fit my needs. In the meantime, I'm still researching information, contemplating plumbing, and collecting used equipment. The tank will be located in Sonoma County, and I will be installing solar panels very soon to offset PG&E.
FYI, the $1,300 price is for a new 260g (72x24x36), 3/4" glass, with custom overflow by Elite Aquariums. I'm hoping to order the tank towards the end of the process after most of the specifications have been decided.
Do you know if Lapsan still has his tank running? Would love to check it out.