Kessil

Max’s 30 gal

RandyC said:
Adding an airstone is not guaranteed to work. If the co2 in the house is high because it’s a well sealed house, could actually have the opposite effect.
Click to expand...
In my experience it never work. I thinl because one airtime is nothing for the volume of water.
2nd if the issue is high co2 content in the air, airstone will not do nothing but bring more co2 to the system..
 
ofzakaria said:
In my experience it never work. I thinl because one airtime is nothing for the volume of water.
2nd if the issue is high co2 content in the air, airstone will not do nothing but bring more co2 to the system..
Click to expand...
So what if I get an air stone and a air pump that pushes air through a scrubber and into the stone after being scrubbed. Eheim has 2 models which look interesting, they have two outputs so I could have them go pump -> one tube -> co2 scrubber -> tube -> airstone
 
max_nano said:
So what if I get an air stone and a air pump that pushes air through a scrubber and into the stone after being scrubbed. Eheim has 2 models which look interesting, they have two outputs so I could have them go pump -> one tube -> co2 scrubber -> tube -> airstone
Click to expand...
I tried this before. It was not that effective. I thinl again because the airstone is small compared to the amount of air fusion skimmer does..
 
Super fast growing green acro from Neptune prime for DBTC when it’s bigger
5252D549-609B-4CE6-AAB9-3CB21DDDC04B.jpeg

digi island, I will add the blue one soon
FE329213-1904-45C7-A742-2E7A627E2B79.jpeg

Strawberry Shortcake from UC and Battle defuego I believe
778FA7C8-25C3-492E-9859-925459EB33E3.jpeg

PC rainbow and Blue Millie
8B4D3BAB-C192-4B4B-9318-8BC1C8C92012.jpeg

Digis
979EF180-BD05-44BA-9F0B-FBD6BB12A253.jpeg
10409755-6EE9-4090-A6E2-D32CC5703B04.jpeg
2E9E492D-F216-4161-9C13-68A97F189553.jpeg

DBTC Green nepthea growing wide
D87F4194-75C9-4798-8620-FD900307AF07.jpeg

Alk has been super stable I think I’m dosing 7mL bionic 2-part. Today the pH went up because of the windows being open all day and then alk went lower which may mean increased intake, but I also added frags recently.
21F14BED-3513-48B8-8773-40347C156FB4.jpeg
 
RandyC said:
Adding an airstone is not guaranteed to work. If the co2 in the house is high because it’s a well sealed house, could actually have the opposite effect.
Click to expand...
since he has no skimmer, i was saying this would be a way to help without adding a skimmer. i agree, if the co2 in the house is high it wont help (or will make it worse.) if the issue is his lack of air exchange because of no skimmer, this could help.
 
So airstone with the scrubber won’t work. If I get a skimmer is it feasible to just tune it to not skim much? I do not need additional nutrient export but I do want to increase pH and a scrubber seems to be the most reliable option. I’m going windows open again and surface agitation is high enough for that to make a difference, but I need something more consistent since I can’t always have my windows open.
 
max_nano said:
So airstone with the scrubber won’t work. If I get a skimmer is it feasible to just tune it to not skim much? I do not need additional nutrient export but I do want to increase pH and a scrubber seems to be the most reliable option. I’m going windows open again and surface agitation is high enough for that to make a difference, but I need something more consistent since I can’t always have my windows open.
Click to expand...
Yes, I do this- I just raised the skimmer to the lowest water point and run it wide open for a dry skim. You will have to clean the neck more often than the collection cup in this case.
 
max_nano said:
So airstone with the scrubber won’t work. If I get a skimmer is it feasible to just tune it to not skim much? I do not need additional nutrient export but I do want to increase pH and a scrubber seems to be the most reliable option. I’m going windows open again and surface agitation is high enough for that to make a difference, but I need something more consistent since I can’t always have my windows open.
Click to expand...
U really do not run skimmer?
Why do not you get small skimmer like the innovative marine one. I am using it mainly for purpose of air bubbles, thu its also a great skimmer so far
 
This tank has been filled for a little over a month now, rocks went in 7/22. And I’m spotting coralline on some rocks and on the frag rack. It is exciting to see how quickly this tank has progressed and without going through any major ugly phases. Fingers crossed it stays that way
3D8B8803-2469-45D7-BBE0-30CBD13D57FE.jpeg
 
max_nano said:
I suppose it doesn’t matter if the water level is high enough for it to skim if I’m mostly looking to use it as a more effective airstone for co2 scrubbing
Click to expand...
Yeh i also think regardless of the water hight(to an extent) it will still not matter, the simmer push water to and inside cavity at a flat level, then you adjust the cup for your cup cone bubble level. So I think regardless of the water height outside the skimmer, u will get the inside skimmer body water level skimmer need...
I think...
 
I put a gyre under the tall frag rack and am now a lot happier with how the flow is looking, eventually when I have stuff fill in more I will add another Nero but it’s working well now that the gyre keeps the bottom flowing while the Nero can cause surface agitation.

I have been keeping my windows open and have seen an increase in pH. I’ll probably buy a skimmer next month so I can hook up a co2 scrubber.

With the gyre I also picked up the marine depot cable organizer cabinet and will be moving my gear to that so everything can look less chaotic and rat nest like. I’ll hopefully get that all set this weekend, I think I’ll even be able to mount it to my t slot stand
 
You must log in or register to reply here.
Back
Top