High Tide Aquatics

My 50g "The Rock Wall" Project: First Reef Tank

09A8981D-8BC1-4268-A933-12AF3C2D28C9.png
 
Sorry to hear the tank isn't doing well.
Don't be ashamed to ask questions or ask for help.
You need to siphon out all the dead algea in the tank. If not, all the nitrates and phosphates will end up in the water again.
Have you been doing consistent, regular water changes? That might be helpful.
I agree that the Ca, Alk and Mg are all to high.
 
Coral reefer said:
Alk always that high? That’s a tough range for a lot of sps IMO. I’d go with more like 8ish
Click to expand...
I have been trying to increase my pH but Alk seems to ride along with it. I know its at the upper end of the tolerable range but still within range. I can lower it slowly and see if I can keep pH >=8.
 
dochou said:
Sorry to hear the tank isn't doing well.
Don't be ashamed to ask questions or ask for help.
You need to siphon out all the dead algea in the tank. If not, all the nitrates and phosphates will end up in the water again.
Have you been doing consistent, regular water changes? That might be helpful.
I agree that the Ca, Alk and Mg are all to high.
Click to expand...
H2O changes sometimes but prob not as often as I should.
 
MolaMola said:
Salinity is low, too. Do you mix your own saltwater? Do you use an ATO? Seems like the salinity is changing quite a bit, too.
Click to expand...
I do mix my own and use an ATO. I find that the Neptune salinity checker is a bit "noisey" so not changing as fast as the graph may show.
 

This video does a good deep dive into the difference between Ph and alkalinity.

But what Coral Reefer said, don't look at ph, look at alk/dKh.
 
It's been 8 months since my last tank update. Parameters are stabilizing as I get into a better maintenance rhythm. The biggest improvement took just 2 inches. Early on, as my filter sock in my sump filled with gunk, if i didn't change it out in time (which I rarely did), the water would start to overflow and dump out of the sump. Then the ATO would kick in and work overtime to get the water level back to where it was supposed to be. These major inflows of fresh water would crash my salinity and change a bunch of other parameters quickly. I finally figure out that if I lowered the sock about 2" below the deck of the sump by removing it from its holder, the overflowing water would just dump back into the sump, preserving parameters. Sounds so simple now... Another game changer was sucking it up and shelling out for two Apex powerheads which VASTLY improved flow and controllability in my tank.

Anyway with this and recurring algae harvests as the tank finishes it lengthy cycling process, I am finally seeing my gsp's, zoas and even my one sps begin to grow and spread. This is my single greatest victory so far, to see my sps coming off of its puck and beginning to grow onto its host rock, finally.

Here are some pics to document current conditions:
ADA7E2CD-6907-45FC-8A60-E21B29B9C839.jpeg
5FE981A5-4D5D-4C1A-A938-2CE3738DD0C8.jpeg
1F676A48-37AA-4AE0-AE25-4B2C7F8FB6E4.jpeg
7FBE9237-CD42-4380-A1D0-300A1C5B7240.jpeg
9223E74D-917E-4F02-91EE-13918C596303.jpeg
7044569A-D6E1-447C-89E7-B7E6A36413AA.jpeg
52FBC034-F2AA-4AD2-A5DE-7A42C58A7F2F.jpeg
BD396702-1151-44CA-B669-4710E86CB480.jpeg
 
You must log in or register to reply here.
Back
Top