My 50g "The Rock Wall" Project: First Reef Tank
- Thread starter Dorfman
- Start date
Coral reefer
Past President
Alk always that high? That’s a tough range for a lot of sps IMO. I’d go with more like 8ish
H2OPlayar
Supporting Member
My first reaction is that your numbers are all high. I would shoot for 8.5;420;1350 or something close to that. Change things slowly, but pick a target around there.
dochou
Supporting Member
Sorry to hear the tank isn't doing well.
Don't be ashamed to ask questions or ask for help.
You need to siphon out all the dead algea in the tank. If not, all the nitrates and phosphates will end up in the water again.
Have you been doing consistent, regular water changes? That might be helpful.
I agree that the Ca, Alk and Mg are all to high.
Don't be ashamed to ask questions or ask for help.
You need to siphon out all the dead algea in the tank. If not, all the nitrates and phosphates will end up in the water again.
Have you been doing consistent, regular water changes? That might be helpful.
I agree that the Ca, Alk and Mg are all to high.
I know on my apex I just use the salinity number as a reference. I have never got that thing to read right.
MolaMola
Supporting Member
Agreed. I would check salinity another way then. I thought the last salinity reading shown was recent but it was January.
Dorfman
Supporting Member
I have been trying to increase my pH but Alk seems to ride along with it. I know its at the upper end of the tolerable range but still within range. I can lower it slowly and see if I can keep pH >=8.
Dorfman
Supporting Member
H2O changes sometimes but prob not as often as I should.
Dorfman
Supporting Member
I do mix my own and use an ATO. I find that the Neptune salinity checker is a bit "noisey" so not changing as fast as the graph may show.
Dorfman
Supporting Member
Agreed, I have two refractometers to validate Apex and its usually close but bounces around a lot.
Coral reefer
Past President
Stop looking at ph. Seriously, just stop. Get alk between 8-9. Everything else will be ok
Dorfman
Supporting Member
It's been 8 months since my last tank update. Parameters are stabilizing as I get into a better maintenance rhythm. The biggest improvement took just 2 inches. Early on, as my filter sock in my sump filled with gunk, if i didn't change it out in time (which I rarely did), the water would start to overflow and dump out of the sump. Then the ATO would kick in and work overtime to get the water level back to where it was supposed to be. These major inflows of fresh water would crash my salinity and change a bunch of other parameters quickly. I finally figure out that if I lowered the sock about 2" below the deck of the sump by removing it from its holder, the overflowing water would just dump back into the sump, preserving parameters. Sounds so simple now... Another game changer was sucking it up and shelling out for two Apex powerheads which VASTLY improved flow and controllability in my tank.
Anyway with this and recurring algae harvests as the tank finishes it lengthy cycling process, I am finally seeing my gsp's, zoas and even my one sps begin to grow and spread. This is my single greatest victory so far, to see my sps coming off of its puck and beginning to grow onto its host rock, finally.
Here are some pics to document current conditions:
Anyway with this and recurring algae harvests as the tank finishes it lengthy cycling process, I am finally seeing my gsp's, zoas and even my one sps begin to grow and spread. This is my single greatest victory so far, to see my sps coming off of its puck and beginning to grow onto its host rock, finally.
Here are some pics to document current conditions:
Dorfman
Supporting Member
That little patch of AOG's is from you. Hoping to be spreading the love soon.