Kessil

Tapmorf's In Wall Upgrade

Neat! I can't wait to see more photos.

Is it styrofoam insulation you're talking about? Won't the weight of the tank basically just flatten it?
 
Sorry for the delay. Here are some pics :D

First some supplies I picked up from this past weekend.

Matt was nice enough to give away his surplus of reef equipment so I picked up his old 75g AGA to use as a transfer and holding tank and came away with a fuge light and a couple of pumps as well. Thanks again !
939_04_11_08_7_33_25.jpg


Some baffles from TAP.
939_04_11_08_7_32_48.jpg


Wood from HD.
939_04_11_08_7_32_16.jpg
 
We added a 2x6 for the sill.
939_04_11_08_7_34_49.jpg


We had to remove the central vac and will need to run the 2" vacuum pvc to another location.
939_04_11_08_7_34_26.jpg


Framing started for the top of the stand. (Excuse the clutter) ::)
939_04_11_08_7_35_30.jpg


Does this make you nervous ?
939_04_11_08_7_36_17.jpg


939_04_11_08_7_36_53.jpg
 
I never thought to use glass. In all my DIY sumps, I have always had acrylic baffles inside a glass tank. Is there an advantage ?

[quote author=Elite link=topic=4902.msg62512#msg62512 date=1225854053]
Why are you using acrylic baffles with glass tank?? Glass would be a much better choice..
[/quote]


I have not planned on enclosing the area behind the tank. If I am super motivated I will finish the underside of the stairs with shelves.

[quote author=Elite link=topic=4902.msg62512#msg62512 date=1225854053]
Why are you using acrylic baffles with glass tank?? Glass would be a much better choice..
[/quote]
 
I have officially ordered my tank today. Will be made by Gen at Kritter.

Two weeks from now will be my early Christmas :p

Specs:
48"x36"x24" Acrylic
Eurobraced
3/4" top
1/2" Sides and 3/8" bottom
5"x10" overflow box at center back (1200 gph) 6.5x turnover


Lots to do still:
Paint the stand.
Finish the plywood top.
Finish the opening in the wall.
Frame out the ceiling above the tank.
Finish the underside of the stair
Build lower shelf to stand.
 
It's just that glass stick to glass better. Silicone stick better to glass than acrylic. I guess if the baffles fail, the water is still in the sump.

Congrats on the new tank.. He makes very nice tank.. I love his work..
 
Thank you. So far I have not had a baffle fail yet. Guess I schlop on the silicon heavy. :)

Yep, 48" wide, 36" front to back and 24" high.
 
[quote author=tapmorf link=topic=4902.msg62534#msg62534 date=1225858683]
I have officially ordered my tank today. Will be made by Gen at Kritter.

Two weeks from now will be my early Christmas :p

Specs:
48"x36"x24" Acrylic
Eurobraced
3/4" top
1/2" Sides and 3/8" bottom
5"x10" overflow box at center back (1200 gph) 6.5x turnover


Lots to do still:
Paint the stand.
Finish the plywood top.
Finish the opening in the wall.
Frame out the ceiling above the tank.
Finish the underside of the stair
Build lower shelf to stand.



[/quote]

Gen went with 1/2" sides? With my tank he didn't want to do 1/2" sides. Weird. He said he would only make it with 3/4" (I didn't end up going with Gen). And my tank is smaller than yours. Did he say how big of an eurobrace?
 
Aren't your rims of the tank less than 5". For mine, I have 5" around the front and sides and 6" on the back edge

[quote author=iani link=topic=4902.msg62548#msg62548 date=1225867381]
Gen went with 1/2" sides? With my tank he didn't want to do 1/2" sides. Weird. He said he would only make it with 3/4" (I didn't end up going with Gen). And my tank is smaller than yours. Did he say how big of an eurobrace?
[/quote]
 
Mine is 4" all the way around. Funny thing though is I asked for a quote with 1/2" even if he had to do a bigger eurobrace and he wouldn't do it.
 
[quote author=tapmorf link=topic=4902.msg62545#msg62545 date=1225866047]
Thank you. So far I have not had a baffle fail yet. Guess I schlop on the silicon heavy. :)

Yep, 48" wide, 36" front to back and 24" high.
[/quote]

Good to hear that.. 8) ..

How much Gen charges for that tank?? If you don't mind :)
 
Hey good luck with your setup. The depth is nice isn't it Mike ? :)

[quote author=sfsuphysics link=topic=4902.msg62565#msg62565 date=1225905518]
The thickness of that tank is definitely thicker than my 48x36x24 :D But then again it has a monster brace over the top.

[/quote]
 
We'll see Joyce, I just tested the overflow I put on, it's nice and leak free, now need to clean the sucker... but by this weekend fish will be swimming in it!
 
You must log in or register to reply here.
Back
Top