Kessil

What do I need to connect my RODI line to this?

kinetic

kinetic

Supporting Member
BARcard
Part of the home remodeling work was to get it ready for the fish tank. I have a water source that has a reducer that is two parts that goes down to the 1/4", but the fitting won't securely hold an RO tubing line under pressure. What do I need to get this to connect properly?

IMG_9723.jpeg
IMG_9724.jpeg
 
These are the pieces:
www.homedepot.com

BrassCraft 1/2 in. Compression Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve G2CR19X C1 - The Home Depot

Control water flow to faucets, toilets, icemakers and washing machines with this BrassCraft Nominal Compression Inlet O.D. Compression Outlet Valve.
www.homedepot.com
www.homedepot.com

Everbilt 3/8 in. x 1/4 in. OD Compression Brass Reducing Coupling Fitting 801229 - The Home Depot

Tilt your living space with the selection of Everbilt OD Compression Brass Reducing Coupling Fitting.
www.homedepot.com

Will any of these work better:
- https://www.amazon.com/John-Guest-S...sion/dp/B06XG3ZHGM?ref_=ast_sto_dp&th=1&psc=1
- https://www.amazon.com/John-Guest-S...nect/dp/B06XFWZ615?ref_=ast_sto_dp&th=1&psc=1
- https://www.bulkreefsupply.com/mur-lok-1-4-female-npt-x-1-4-push-connect.html
 
You must log in or register to reply here.
Back
Top