Apex Fusion Club

[roostertech]

I want to see your fusion setup.

Add me as viewer to your apex

Authorization

Add user

Username: roostertech
Level: view

If you want to see mine, though not much is there yet, just add your username here.

Also it would help if you name your apex by going to Setting -> Network -> Advanced -> Hostname

BAR Fusion user list
roostertech
flagg37
yellojello
ckuptime
rygh
vhuang168
eesandoval1

 

[Flagg37]

This is a cool thread. I'll play.

Username: flagg37

 

[yellojello]

Guess mine... yellojello


Sent from my iPhone using Tapatalk

 

[yellojello]

Need to add a ip camera soon


Sent from my iPhone using Tapatalk

 

[roostertech]

Added you guys

 

[RavieReefer]

I added you to an apex JR with not alot going on.... This is on my daughters freshwater tank. I will be adding the new apex when I finally put my tank together. I would like to see your programming too.... ckuptime

 

[Flagg37]

I just updated my heaters' code. Now they should alternate between the two of them and be set to the RT (regional temperature) from the season table.

Let's hope it works. It's good that I don't have anything in there yet for me to test this stuff out on.

 

[jonmos75]

I just updated my heaters' code. Now they should alternate between the two of them and be set to the RT (regional temperature) from the season table.

Let's hope it works. It's good that I don't have anything in there yet for me to test this stuff out on.

That is where I have a test outlet with a night light connected to it so I can test out coding before it goes on to a real outlet.

Jon

 

[rygh]

Sure, sounds fun. I added you guys.
Hopefully @jonmos75 knows what he is doing as far as security. You hackers are going to cook my fish.
user = rygh

 

[jonmos75]

View access is what it says.... you can look but not touch... Lol

Jon

 

[Edgar Sandoval]

I would like to see your skimmer settings during feed mode


Sent from my iPhone using Tapatalk

 

[Vhuang168]

Add me. vhuang168


Sent from my iPhone using Tapatalk

 

[Edgar Sandoval]

Any of u know how to setup the wxm
Controller to control 2 mp40s?


Sent from my iPhone using Tapatalk

 

[yellojello]

Just added cameras to my apex. Trying the Amcrest 2K camera and 1080p camera... can only get high resolution using the Amcrest App... for the Apex view and URL MJPG video, it is low quality.

Here is updated bareefers list:

ckuptime
flagg37
roostertech
rygh
vhuang168
yellojello

 

[yellojello]

Any of u know how to setup the wxm
Controller to control 2 mp40s?


Sent from my iPhone using Tapatalk

https://www.neptunesystems.com/getstarted/wxm/vortech/

 

[Flagg37]

Just added cameras to my apex. Trying the Amcrest 2K camera and 1080p camera... can only get high resolution using the Amcrest App... for the Apex view and URL MJPG video, it is low quality.

Here is updated bareefers list:

ckuptime
flagg37
roostertech
rygh
vhuang168
yellojello

Even though the quality is really low it's still cool. Is the quality due to the camera or the connection or what?

 

[roostertech]

What am I looking at? lol

I think I see a TV?

 

[rygh]

What am I looking at? lol

I think I see a TV?

View attachment 6360

I think @yellojello needs to be careful what he does on that couch while that camera is being shared.

 

[roostertech]

@yellojello, does apex simply embed your video stream into the UI (you have to open your port video feed and make it public) or they it actually transcode and rehost it?

 

[yellojello]

lol, It's at my office, and thats my monitor. Lights are on from 9:30 am to 4:30 pm. the only other place to put the camera is the side of the tank, which would be a smaller viewing window. You only see the reflection when the lights are off. But hey, if you guys tune in at the right time, I might give you guys a show

Most cameras allow for a public URL link. Most likely you will have to fiddle with port forwarding, especially with multiple cameras. Depending on the camera, you get the main full resolution camera stream (which usually works with camera software or browser plugin), and the secondary lower resolution one (have to set it to MJPEG). Depending on the public URL, you add at the end to use the secondary channel, which is what you guys see on mine. Click the cog button on the lower right of the APEX camera box, select MJPEG, and paste in the link. For some reason, I can only view APEX video on IE and Firefox, not Chrome. Are you guys able to see through Chrome? It might be camera dependent.

I still can't find out how to stream the high quality primary channel to APEX, or even the web browser. Perhaps it's not supported yet, or not even possible.

https://forum.neptunesystems.com/fo...ation-with-APEX-Fusion-amp-Classic-Dashboards