Build a Tank Screen Workshop

[Chromis]

In this workshop, supporting members will be provided the materials and support to build a custom screen lid. We’ll build screens similar to the ones BRS sells in kits - the clear netting transmits ~99% of light and keeps your fish safe.

Date: Saturday, May 12, 10a-12p
Location: Liz’s (chromis) house, those of you that don’t have my address yet can PM me for it.
Cost: Free to supporting members.

What you need to do:
1. RSVP by April 21 in this thread so we can order the right amount of screen materials.
2. Bring your inner tank dimensions, including dimensions of any cutouts you need for overflows, cords or pipes.

Example:

3. PM chromis for address if needed
4. Order the lid clips, magnets, or other mounting system that suit your aesthetic and fit your glass. E.g. innovative marine clear clips, $8 for 4 at Amazon: Innovative Marine DIY Mesh Screen Lid Clips - 12mm https://www.amazon.com/dp/B01C91OAJE/ref=cm_sw_r_cp_api_i_obG8AbWA1R8DR

Also BRS: https://www.bulkreefsupply.com/auqa-gadget-screen-top-suspension-clips-innovative-marine.html

 

[Bruce Spiegelman]

I'm in!

 

[Yippee]

I will be there.

 

[Gablami]

I’ll try to make it, but no need to order materials for me. Just going to hang out. Might share some frags.


Sent from my iPhone using Tapatalk

 

[Bruce Spiegelman]

People that are coming to hang out should check and see if others that can't make it may need one made for them. Let's keep everyone busy and help those that are tied up.

 

[tankguy]

Hoping I can make it. I need one for my 180

 

[Vhuang168]

I'm a maybe. But I don't need materials. Just hanging out.


Sent from my iPhone using Tapatalk

 

[Deereef]

I will be there. Thanks

 

[Ibn]

Anyone try to notch out parts of the corner before? Interested in building one for the new tank, but each corner is reinforce with a triangle so the corners aren't squared.

 

[Wlachnit]

I do not need a screen top but am planning on coming.

 

[NanoCrazed]

Instead of the clips, consider using flange corner inserts rather than standard corners.

Super clean and flushed look!

 

[daddio]

Peter and I would love to attend

 

[sfsuphysics]

I understand not wanting to publicly post your address, but before I think of committing can I at least find out which city?

 

[Bruce Spiegelman]

Instead of the clips, consider using flange corner inserts rather than standard corners.

Super clean and flushed look!

Where do we get those?

 

[Bruce Spiegelman]

I understand not wanting to publicly post your address, but before I think of committing can I at least find out which city?

Weird -- she's told everyone but you........ weird.....

 

[NelsonCh]

So for example, a standard screen top would only need 8 clear clips? 4 for the sides and 4 for the overflow? Are magnets necessary?


Sent from my iPhone using Tapatalk

 

[Chromis]

I understand not wanting to publicly post your address, but before I think of committing can I at least find out which city?

Mountain View near Shoreline & 101

 

[NanoCrazed]

Where do we get those?

https://www.swisco.com/Overlap-Scre...-Keys-for-5_16-inch-Thick-Screen-Frame/95-221

 

[NanoCrazed]

Mountain View near Shoreline & 101

We're practically neighbors!

In the Monta Loma area...

 

[NanoCrazed]

From another reefer's tank...here's what the flanged corner inserts would look like