Welcome to BAR - the Bay Area's premier saltwater hobbyists hub!

Glass scratch repair

JAR

Guest
Joined
Jan 17, 2009
Messages
3,965
I have a small scratch on the front (outside) glass of my tank since it was new.
I want to get rid of it.
These suggestions came up on a google search.
Tooth paste
jewlers rouge
clear nail polish

Any other ideas?
 
Guest
Joined
Aug 29, 2009
Messages
2,445
Glass scratch remover. No, really. I think a place like Bank Glass would likely carry a kit with a scratch remover and polish kit. Of course, I might just be imagining it but I'm pretty sure such a product exists. :)
 
Supporting Member
Joined
Jun 29, 2010
Messages
7,114
Buffing compound, then clear epoxy.
Look at the kits they sell for glass table tops.
 
Joined
Apr 6, 2007
Messages
1,146
I've used tooth paste for my acrylic and it works great, for glass you might want to try a dremil with a buffer bit and some polishing/buffing compound
 
Guest
Joined
Jun 17, 2009
Messages
925
You may wanna try those resin kits they sell to fix bullseye on windshield glass.
They've worked great on cracks and bullseye...
Don't know about scratch, but the theory is you apply the liquid and place a plastic, which comes with the kit, over the liquid, forcing it to spread into very thin layer onto the scratch/crack filling all the void.
Then, it cures with just light. Maybe it works... don't know...
 
Supporting Member
Joined
Nov 7, 2005
Messages
17,384
JAR said:
northbay-reefer said:
I've used tooth paste for my acrylic and it works great, for glass you might want to try a dremil with a buffer bit and some polishing/buffing compound


Great idea!

Scratch a piece of scrap/broken glass first and test on that though ;)
 

JAR

Guest
Joined
Jan 17, 2009
Messages
3,965
sfsuphysics said:
JAR said:
northbay-reefer said:
I've used tooth paste for my acrylic and it works great, for glass you might want to try a dremil with a buffer bit and some polishing/buffing compound


Great idea!

Scratch a piece of scrap/broken glass first and test on that though ;)

That is an old contractor trick!
 
Guest
Joined
Dec 25, 2010
Messages
268
From what I gathered, if the scratch is deep enough to feel with your nail you won't be able to get it out. Otherwise you can use one of the methods mentioned above.
 
Top