Cali Kid Corals

Here we go again - Dave's 120 g

MLK weekend saw me get a chance to upgrade my sump a little. I was still using the tiny 20g I got from the cylinder and it was so cramped!


20180114_112035.jpg


Thanks to @xcaret I was able to get a 45g acrylic as a base, a few simple baffles and sock holder and a world of difference

20180114_112121.jpg


20180116_185045.jpg


Next up will be switching to hard plumbing throughout now I am done getting this finished up.
 
Pretty much 2 years now since I set up my 120 and it's looking pretty good with a fairly minimal/simple set up. Here are the compare and contrast photos.


20171219_173253.jpg
20191121_191347.jpg

I average 15g water change every 2 weeks, top off with Kalk/Vinegar and feed brine shrimp once daily. Occasionally I will add some Reef Roids and Selcon, but by and large, that's about it, I just leave it alone and enjoy.

Had a few Cyano blooms, so I added in an Ice Cap Gyro 3k, but luckily that's been about it.
 
Thanks.

The back wall is covered in coralline that is plating out - I keep having to trim it back as it blocks the overflow teeth. Also, have a tiny frag shelf in the middle which could be what looks like glued on?
The clam is huge, and is, well, happy as a clam :) It came along with the acquisition of the cylinder tank that led to this setup.
 
Wlachnit said:
Wow... looks great. That clam looks like it has grown since we took that tank down.
Click to expand...
Thanks Will - I am still ever thankful for your help moving that cylinder thingy into what I ended up with now! New Years' resolution is to try and be a little more involved with the club again.
 
So it seems that when there are no "problems" to fix in the tank, you find your own problems, just to keep busy :) Next up is to clean up my water making station. I have 2 x 30g totes, one for fresh RODI and the other for mixing my saltwater. Up until last weekend, I was fine pumping the saltwater into 5g containers and hauling them across the garage to my sump for changes, but decided I could just add a line from my reservoir to the sump

20191207_080947.jpg
20191207_080954.jpg


Now I am noodling on a diverter valve so I can drain water from my sump using the main return.

20191207_081136.jpg


The hope here is that I can save my back a little from carrying al the water, automate the water change to a large degree, which in turn may mean I do more changes.

Finally, I have a utility sink coming in order to clean up the RODI station area. Cleaning my skimmer in the kitchen sink isn't always looked well upon :)
 
Ok, got my projects mostly complete now in the garage! I tried out my new water change today using the 3-way diverter from my main return. It works pretty cool.

20191217_115023.jpg


Also got my utility sink plumbed up so I no longer need to clean the skimmer in the kitchen sink!

20191217_120348 (1).jpg
 

Attachments

  • 20191207_081136.jpg
    20191207_081136.jpg
    74.5 KB · Views: 426
  • 20191207_080954.jpg
    20191207_080954.jpg
    44.2 KB · Views: 426
You must log in or register to reply here.
Back
Top