Jestersix

Michael's 300 In Vegas

I ordered the one size up, so it is 5/8" - 1 1/4", so with the algae scraper it is still centered at 3/4" glass. And I have a spacer to "weaken" the field. But seriously, these magnets are no joke. My other smaller ones can hurt a finger badly, these would be catastrophic.
I’ve never used the scraper attachment actually. Just the algae cutter mesh bags/socks
 
1000006168.jpg


Got two sheets of 3/4" plywood over there now, and filled it up to 50 gallons with no noticeable flex in any bad directions.
 
It’s the bulge in the black bin
I would recommend no more than halfway fill max
These bins are surprisingly strong. I kept 50 gallons in here before when I first moved out which is where I got the idea from. I agree filling it all the way would likely be a mistake, but it gives me a good buffer of water given how much I to use.
 
@H2OPlayar
May all your waters be contained and in your full control!
And if not, it's just the garage floor and it drains down my driveway. I'd be lying if I said I hadn't forgotten about my rodi waste water line when I was pumping it into a brute can (for watering outdoor plants in the summer) and drained 15+ gallons on the floor of the garage...at least 5 different times.
 
And if not, it's just the garage floor and it drains down my driveway. I'd be lying if I said I hadn't forgotten about my rodi waste water line when I was pumping it into a brute can (for watering outdoor plants in the summer) and drained 15+ gallons on the floor of the garage...at least 5 different times.
Unattended water does move faster than attended water!!
That I can speak of firsthand experience…unfortunately
 
Back
Top